cimpy.cgmes_v2_4_15.GovGAST1 module

class cimpy.cgmes_v2_4_15.GovGAST1.GovGAST1(a=0.0, b=0.0, db1=0.0, db2=0.0, eps=0.0, fidle=0.0, gv1=0.0, gv2=0.0, gv3=0.0, gv4=0.0, gv5=0.0, gv6=0.0, ka=0.0, kt=0.0, lmax=0.0, loadinc=0.0, ltrate=0.0, mwbase=0.0, pgv1=0.0, pgv2=0.0, pgv3=0.0, pgv4=0.0, pgv5=0.0, pgv6=0.0, r=0.0, rmax=0.0, t1=0.0, t2=0.0, t3=0.0, t4=0.0, t5=0.0, tltr=0.0, vmax=0.0, vmin=0.0, *args, **kw_args)[source]

Modified single shaft gas turbine.

a:

Turbine power time constant numerator scale factor (a). Typical Value = 0.8. Default: 0.0

b:

Turbine power time constant denominator scale factor (b). Typical Value = 1. Default: 0.0

db1:

Intentional dead-band width (db1). Unit = Hz. Typical Value = 0. Default: 0.0

db2:

Unintentional dead-band (db2). Unit = MW. Typical Value = 0. Default: 0.0

eps:

Intentional db hysteresis (eps). Unit = Hz. Typical Value = 0. Default: 0.0

fidle:

Fuel flow at zero power output (Fidle). Typical Value = 0.18. Default: 0.0

gv1:

Nonlinear gain point 1, PU gv (Gv1). Typical Value = 0. Default: 0.0

gv2:

Nonlinear gain point 2,PU gv (Gv2). Typical Value = 0. Default: 0.0

gv3:

Nonlinear gain point 3, PU gv (Gv3). Typical Value = 0. Default: 0.0

gv4:

Nonlinear gain point 4, PU gv (Gv4). Typical Value = 0. Default: 0.0

gv5:

Nonlinear gain point 5, PU gv (Gv5). Typical Value = 0. Default: 0.0

gv6:

Nonlinear gain point 6, PU gv (Gv6). Typical Value = 0. Default: 0.0

ka:

Governor gain (Ka). Typical Value = 0. Default: 0.0

kt:

Temperature limiter gain (Kt). Typical Value = 3. Default: 0.0

lmax:

Ambient temperature load limit (Lmax). Lmax is the turbine power output corresponding to the limiting exhaust gas temperature. Typical Value = 1. Default: 0.0

loadinc:

Valve position change allowed at fast rate (Loadinc). Typical Value = 0.05. Default: 0.0

ltrate:

Maximum long term fuel valve opening rate (Ltrate). Typical Value = 0.02. Default: 0.0

mwbase:

Base for power values (MWbase) (> 0). Unit = MW. Default: 0.0

pgv1:

Nonlinear gain point 1, PU power (Pgv1). Typical Value = 0. Default: 0.0

pgv2:

Nonlinear gain point 2, PU power (Pgv2). Typical Value = 0. Default: 0.0

pgv3:

Nonlinear gain point 3, PU power (Pgv3). Typical Value = 0. Default: 0.0

pgv4:

Nonlinear gain point 4, PU power (Pgv4). Typical Value = 0. Default: 0.0

pgv5:

Nonlinear gain point 5, PU power (Pgv5). Typical Value = 0. Default: 0.0

pgv6:

Nonlinear gain point 6, PU power (Pgv6). Typical Value = 0. Default: 0.0

r:

Permanent droop (R). Typical Value = 0.04. Default: 0.0

rmax:

Maximum fuel valve opening rate (Rmax). Unit = PU/sec. Typical Value = 1. Default: 0.0

t1:

Governor mechanism time constant (T1). T1 represents the natural valve positioning time constant of the governor for small disturbances, as seen when rate limiting is not in effect. Typical Value = 0.5. Default: 0.0

t2:

Turbine power time constant (T2). T2 represents delay due to internal energy storage of the gas turbine engine. T2 can be used to give a rough approximation to the delay associated with acceleration of the compressor spool of a multi-shaft engine, or with the compressibility of gas in the plenum of the free power turbine of an aero-derivative unit, for example. Typical Value = 0.5. Default: 0.0

t3:

Turbine exhaust temperature time constant (T3). T3 represents delay in the exhaust temperature and load limiting system. Typical Value = 3. Default: 0.0

t4:

Governor lead time constant (T4). Typical Value = 0. Default: 0.0

t5:

Governor lag time constant (T5). Typical Value = 0. Default: 0.0

tltr:

Valve position averaging time constant (Tltr). Typical Value = 10. Default: 0.0

vmax:

Maximum turbine power, PU of MWbase (Vmax). Typical Value = 1. Default: 0.0

vmin:

Minimum turbine power, PU of MWbase (Vmin). Typical Value = 0. Default: 0.0

Documentation of parent class TurbineGovernorDynamics:

Turbine-governor function block whose behavior is described by reference to a standard model

AsynchronousMachineDynamics:

Asynchronous machine model with which this turbine-governor model is associated. Default: None

SynchronousMachineDynamics:

Turbine-governor model associated with this synchronous machine model. Default: “list”

TurbineLoadControllerDynamics:

Turbine load controller providing input to this turbine-governor. Default: None

Documentation of parent class DynamicsFunctionBlock:

Abstract parent class for all Dynamics function blocks.

enabled:

Function block used indicator. true = use of function block is enabled false = use of function block is disabled. Default: False

Documentation of parent class IdentifiedObject:

This is a root class to provide common identification for all classes needing identification and naming attributes.

DiagramObjects:

The domain object to which this diagram object is associated. Default: “list”

description:

The description is a free human readable text describing or naming the object. It may be non unique and may not correlate to a naming hierarchy. Default: ‘’

energyIdentCodeEic:

The attribute is used for an exchange of the EIC code (Energy identification Code). The length of the string is 16 characters as defined by the EIC code. References: Default: ‘’

mRID:

Master resource identifier issued by a model authority. The mRID is globally unique within an exchange context. Global uniqueness is easily achieved by using a UUID, as specified in RFC 4122, for the mRID. The use of UUID is strongly recommended. For CIMXML data files in RDF syntax conforming to IEC 61970-552 Edition 1, the mRID is mapped to rdf:ID or rdf:about attributes that identify CIM object elements. Default: ‘’

name:

The name is any free human readable and possibly non unique text naming the object. Default: ‘’

shortName:

The attribute is used for an exchange of a human readable short name with length of the string 12 characters maximum. Default: ‘’

Inheritance Diagram:

Inheritance diagram of cimpy.cgmes_v2_4_15.GovGAST1