cimpy.cgmes_v2_4_15.ExcIEEEST7B module
- class cimpy.cgmes_v2_4_15.ExcIEEEST7B.ExcIEEEST7B(kh=0.0, kia=0.0, kl=0.0, kpa=0.0, oelin=None, tb=0, tc=0, tf=0, tg=0, tia=0, uelin=None, vmax=0.0, vmin=0.0, vrmax=0.0, vrmin=0.0, *args, **kw_args)[source]
The class represents IEEE Std 421.5-2005 type ST7B model. This model is representative of static potential-source excitation systems. In this system, the AVR consists of a PI voltage regulator. A phase lead-lag filter in series allows introduction of a derivative function, typically used with brushless excitation systems. In that case, the regulator is of the PID type. In addition, the terminal voltage channel includes a phase lead-lag filter. The AVR includes the appropriate inputs on its reference for overexcitation limiter (OEL1), underexcitation limiter (UEL), stator current limiter (SCL), and current compensator (DROOP). All these limitations, when they work at voltage reference level, keep the PSS (VS signal from Type PSS1A, PSS2A, or PSS2B) in operation. However, the UEL limitation can also be transferred to the high value (HV) gate acting on the output signal. In addition, the output signal passes through a low value (LV) gate for a ceiling overexcitation limiter (OEL2). Reference: IEEE Standard 421.5-2005 Section 7.7.
- kh
High-value gate feedback gain (K). Typical Value 1. Default: 0.0
- kia
Voltage regulator integral gain (K). Typical Value = 1. Default: 0.0
- kl
Low-value gate feedback gain (K). Typical Value 1. Default: 0.0
- kpa
Voltage regulator proportional gain (K). Typical Value = 40. Default: 0.0
- oelin
OEL input selector (OELin). Typical Value = noOELinput. Default: None
- tb
Regulator lag time constant (T). Typical Value 1. Default: 0
- tc
Regulator lead time constant (T). Typical Value 1. Default: 0
- tf
Excitation control system stabilizer time constant (T). Typical Value 1. Default: 0
- tg
Feedback time constant of inner loop field voltage regulator (T). Typical Value 1. Default: 0
- tia
Feedback time constant (T). Typical Value = 3. Default: 0
- uelin
UEL input selector (UELin). Typical Value = noUELinput. Default: None
- vmax
Maximum voltage reference signal (V). Typical Value = 1.1. Default: 0.0
- vmin
Minimum voltage reference signal (V). Typical Value = 0.9. Default: 0.0
- vrmax
Maximum voltage regulator output (V). Typical Value = 5. Default: 0.0
- vrmin
Minimum voltage regulator output (V). Typical Value = -4.5. Default: 0.0
Documentation of parent class ExcitationSystemDynamics:
Excitation system function block whose behavior is described by reference to a standard model
- SynchronousMachineDynamics
Synchronous machine model with which this excitation system model is associated. Default: None
- PowerSystemStabilizerDynamics
Power system stabilizer model associated with this excitation system model. Default: None
- PFVArControllerType1Dynamics
Power Factor or VAr controller Type I model associated with this excitation system model. Default: None
- VoltageCompensatorDynamics
Voltage compensator model associated with this excitation system model. Default: None
- DiscontinuousExcitationControlDynamics
Discontinuous excitation control model associated with this excitation system model. Default: None
- UnderexcitationLimiterDynamics
Undrexcitation limiter model associated with this excitation system model. Default: None
- PFVArControllerType2Dynamics
Power Factor or VAr controller Type II model associated with this excitation system model. Default: None
- OverexcitationLimiterDynamics
Overexcitation limiter model associated with this excitation system model. Default: None
Documentation of parent class DynamicsFunctionBlock:
Abstract parent class for all Dynamics function blocks.
- enabled
Function block used indicator. true = use of function block is enabled false = use of function block is disabled. Default: False
Documentation of parent class IdentifiedObject:
This is a root class to provide common identification for all classes needing identification and naming attributes.
- DiagramObjects
The domain object to which this diagram object is associated. Default: “list”
- mRID
Master resource identifier issued by a model authority. The mRID is globally unique within an exchange context. Global uniqueness is easily achieved by using a UUID, as specified in RFC 4122, for the mRID. The use of UUID is strongly recommended. For CIMXML data files in RDF syntax conforming to IEC 61970-552 Edition 1, the mRID is mapped to rdf:ID or rdf:about attributes that identify CIM object elements. Default: ‘’
- name
The name is any free human readable and possibly non unique text naming the object. Default: ‘’
- description
The description is a free human readable text describing or naming the object. It may be non unique and may not correlate to a naming hierarchy. Default: ‘’
- energyIdentCodeEic
The attribute is used for an exchange of the EIC code (Energy identification Code). The length of the string is 16 characters as defined by the EIC code. References: Default: ‘’
- shortName
The attribute is used for an exchange of a human readable short name with length of the string 12 characters maximum. Default: ‘’