A facility for providing variable and controllable shunt reactive power. The SVC typically consists of a stepdown transformer, filter, thyristor-controlled reactor, and thyristor-switched capacitor arms. The SVC may operate in fixed MVar output mode or in voltage control mode. When in voltage control mode, the output of the SVC will be proportional to the deviation of voltage at the controlled bus from the voltage setpoint. The SVC characteristic slope defines the proportion. If the voltage at the controlled bus is equal to the voltage setpoint, the SVC MVar output is zero. More...

#include <StaticVarCompensator.hpp>

Inheritance diagram for CIMPP::StaticVarCompensator:

[legend]

Collaboration diagram for CIMPP::StaticVarCompensator:

[legend]

Public Member Functions
const char *	debugString () const override
const std::list< std::string > &	getAttributeNames () const override
const std::string &	getClassNamespaceUrl () const override
const std::string &	getAttributeNamespaceUrl (const std::string &attrName) const override
const std::list< CGMESProfile > &	getPossibleProfiles () const override
const CGMESProfile &	getRecommendedProfile () const override
const std::list< CGMESProfile > &	getPossibleAttributeProfiles (const std::string &attrName) const override
const std::list< CGMESProfile > &	getPossibleProfilesIncludingAttributes () const override
void	addPrimitiveGetFnsToMap (std::map< std::string, get_function > &get_map) const override
void	addClassGetFnsToMap (std::map< std::string, class_get_function > &get_map) const override
void	addEnumGetFnsToMap (std::map< std::string, get_function > &get_map) const override
bool	isAssignableFrom (BaseClass *otherObject) const override
Public Member Functions inherited from BaseClass
void	setRdfid (const std::string &id)
std::string	getRdfid () const

Static Public Member Functions
static void	addConstructToMap (std::unordered_map< std::string, BaseClass ()()> &factory_map)
static void	addPrimitiveAssignFnsToMap (std::unordered_map< std::string, assign_function > &assign_map)
static void	addClassAssignFnsToMap (std::unordered_map< std::string, class_assign_function > &assign_map)
static const BaseClassDefiner	declare ()
Static Public Member Functions inherited from CIMPP::RegulatingCondEq
static void	addConstructToMap (std::unordered_map< std::string, BaseClass ()()> &factory_map)
static void	addPrimitiveAssignFnsToMap (std::unordered_map< std::string, assign_function > &assign_map)
static void	addClassAssignFnsToMap (std::unordered_map< std::string, class_assign_function > &assign_map)
static const BaseClassDefiner	declare ()
Static Public Member Functions inherited from CIMPP::EnergyConnection
static void	addConstructToMap (std::unordered_map< std::string, BaseClass ()()> &factory_map)
static void	addPrimitiveAssignFnsToMap (std::unordered_map< std::string, assign_function > &assign_map)
static void	addClassAssignFnsToMap (std::unordered_map< std::string, class_assign_function > &assign_map)
static const BaseClassDefiner	declare ()
Static Public Member Functions inherited from CIMPP::ConductingEquipment
static void	addConstructToMap (std::unordered_map< std::string, BaseClass ()()> &factory_map)
static void	addPrimitiveAssignFnsToMap (std::unordered_map< std::string, assign_function > &assign_map)
static void	addClassAssignFnsToMap (std::unordered_map< std::string, class_assign_function > &assign_map)
static const BaseClassDefiner	declare ()
Static Public Member Functions inherited from CIMPP::Equipment
static void	addConstructToMap (std::unordered_map< std::string, BaseClass ()()> &factory_map)
static void	addPrimitiveAssignFnsToMap (std::unordered_map< std::string, assign_function > &assign_map)
static void	addClassAssignFnsToMap (std::unordered_map< std::string, class_assign_function > &assign_map)
static const BaseClassDefiner	declare ()
Static Public Member Functions inherited from CIMPP::PowerSystemResource
static void	addConstructToMap (std::unordered_map< std::string, BaseClass ()()> &factory_map)
static void	addPrimitiveAssignFnsToMap (std::unordered_map< std::string, assign_function > &assign_map)
static void	addClassAssignFnsToMap (std::unordered_map< std::string, class_assign_function > &assign_map)
static const BaseClassDefiner	declare ()
Static Public Member Functions inherited from CIMPP::IdentifiedObject
static void	addConstructToMap (std::unordered_map< std::string, BaseClass ()()> &factory_map)
static void	addPrimitiveAssignFnsToMap (std::unordered_map< std::string, assign_function > &assign_map)
static void	addClassAssignFnsToMap (std::unordered_map< std::string, class_assign_function > &assign_map)
static const BaseClassDefiner	declare ()
Static Public Member Functions inherited from BaseClass
static void	addConstructToMap (std::unordered_map< std::string, BaseClass ()()> &factory_map)
static void	addPrimitiveAssignFnsToMap (std::unordered_map< std::string, assign_function > &assign_map)
static void	addClassAssignFnsToMap (std::unordered_map< std::string, class_assign_function > &assign_map)
static const CIMPP::BaseClassDefiner	declare ()

Public Attributes
CIMPP::StaticVarCompensatorDynamics *	StaticVarCompensatorDynamics
	Static Var Compensator dynamics model used to describe dynamic behaviour of this Static Var Compensator. Default: nullptr.
CIMPP::Reactance	capacitiveRating
	Capacitive reactance at maximum capacitive reactive power. Shall always be positive. Default: 0.0.
CIMPP::Reactance	inductiveRating
	Inductive reactance at maximum inductive reactive power. Shall always be negative. Default: 0.0.
CIMPP::ReactivePower	q
	Reactive power injection. Load sign convention is used, i.e. positive sign means flow out from a node. Starting value for a steady state solution. Default: 0.0.
CIMPP::SVCControlMode	sVCControlMode
	SVC control mode. Default: 0.
CIMPP::VoltagePerReactivePower	slope
	The characteristics slope of an SVC defines how the reactive power output changes in proportion to the difference between the regulated bus voltage and the voltage setpoint. The attribute shall be a positive value or zero. Default: 0.0.
CIMPP::Voltage	voltageSetPoint
	The reactive power output of the SVC is proportional to the difference between the voltage at the regulated bus and the voltage setpoint. When the regulated bus voltage is equal to the voltage setpoint, the reactive power output is zero. Default: 0.0.
Public Attributes inherited from CIMPP::RegulatingCondEq
CIMPP::RegulatingControl *	RegulatingControl
	The regulating control scheme in which this equipment participates. Default: nullptr.
CIMPP::Boolean	controlEnabled
	Specifies the regulation status of the equipment. True is regulating, false is not regulating. Default: false.
Public Attributes inherited from CIMPP::ConductingEquipment
CIMPP::BaseVoltage *	BaseVoltage
	Base voltage of this conducting equipment. Use only when there is no voltage level container used and only one base voltage applies. For example, not used for transformers. Default: nullptr.
CIMPP::SvStatus *	SvStatus
	The status state variable associated with this conducting equipment. Default: nullptr.
std::list< CIMPP::Terminal * >	Terminals
	Conducting equipment have terminals that may be connected to other conducting equipment terminals via connectivity nodes or topological nodes. Default: {}.
Public Attributes inherited from CIMPP::Equipment
CIMPP::EquipmentContainer *	EquipmentContainer
	Container of this equipment. Default: nullptr.
std::list< CIMPP::OperationalLimitSet * >	OperationalLimitSet
	The operational limit sets associated with this equipment. Default: {}.
CIMPP::Boolean	aggregate
	The aggregate flag provides an alternative way of representing an aggregated (equivalent) element. It is applicable in cases when the dedicated classes for equivalent equipment do not have all of the attributes necessary to represent the required level of detail. In case the flag is set to true the single instance of equipment represents multiple pieces of equipment that have been modelled together as an aggregate equivalent obtained by a network reduction procedure. Examples would be power transformers or synchronous machines operating in parallel modelled as a single aggregate power transformer or aggregate synchronous machine. The attribute is not used for EquivalentBranch, EquivalentShunt and EquivalentInjection. Default: false.
CIMPP::Boolean	inService
	Specifies the availability of the equipment. True means the equipment is available for topology processing, which determines if the equipment is energized or not. False means that the equipment is treated by network applications as if it is not in the model. Default: false.
CIMPP::Boolean	normallyInService
	Specifies the availability of the equipment under normal operating conditions. True means the equipment is available for topology processing, which determines if the equipment is energized or not. False means that the equipment is treated by network applications as if it is not in the model. Default: false.
Public Attributes inherited from CIMPP::PowerSystemResource
std::list< CIMPP::Control * >	Controls
	The controller outputs used to actually govern a regulating device, e.g. the magnetization of a synchronous machine or capacitor bank breaker actuator. Default: {}.
CIMPP::Location *	Location
	Location of this power system resource. Default: nullptr.
std::list< CIMPP::Measurement * >	Measurements
	The measurements associated with this power system resource. Default: {}.
Public Attributes inherited from CIMPP::IdentifiedObject
std::list< CIMPP::DiagramObject * >	DiagramObjects
	The diagram objects that are associated with the domain object. Default: {}.
CIMPP::String	description
	The description is a free human readable text describing or naming the object. It may be non unique and may not correlate to a naming hierarchy. Default: "".
CIMPP::String	energyIdentCodeEic
	The attribute is used for an exchange of the EIC code (Energy identification Code). The length of the string is 16 characters as defined by the EIC code. For details on EIC scheme please refer to ENTSO-E web site. Default: "".
CIMPP::String	mRID
	Master resource identifier issued by a model authority. The mRID is unique within an exchange context. Global uniqueness is easily achieved by using a UUID, as specified in RFC 4122, for the mRID. The use of UUID is strongly recommended. For CIMXML data files in RDF syntax conforming to IEC 61970-552, the mRID is mapped to rdf:ID or rdf:about attributes that identify CIM object elements. Default: "".
CIMPP::String	name
	The name is any free human readable and possibly non unique text naming the object. Default: "".
CIMPP::String	shortName
	The attribute is used for an exchange of a human readable short name with length of the string 12 characters maximum. Default: "".

Static Public Attributes
static const char	debugName [] = "StaticVarCompensator"
Static Public Attributes inherited from CIMPP::RegulatingCondEq
static const char	debugName [] = "RegulatingCondEq"
Static Public Attributes inherited from CIMPP::EnergyConnection
static const char	debugName [] = "EnergyConnection"
Static Public Attributes inherited from CIMPP::ConductingEquipment
static const char	debugName [] = "ConductingEquipment"
Static Public Attributes inherited from CIMPP::Equipment
static const char	debugName [] = "Equipment"
Static Public Attributes inherited from CIMPP::PowerSystemResource
static const char	debugName [] = "PowerSystemResource"
Static Public Attributes inherited from CIMPP::IdentifiedObject
static const char	debugName [] = "IdentifiedObject"
Static Public Attributes inherited from BaseClass
static const char	debugName [] = "BaseClass"

Protected Member Functions
std::map< std::string, AttrDetails >	allAttrDetailsMap () const override

Detailed Description

A facility for providing variable and controllable shunt reactive power. The SVC typically consists of a stepdown transformer, filter, thyristor-controlled reactor, and thyristor-switched capacitor arms. The SVC may operate in fixed MVar output mode or in voltage control mode. When in voltage control mode, the output of the SVC will be proportional to the deviation of voltage at the controlled bus from the voltage setpoint. The SVC characteristic slope defines the proportion. If the voltage at the controlled bus is equal to the voltage setpoint, the SVC MVar output is zero.