A Measurement represents any measured, calculated or non-measured non-calculated quantity. Any piece of equipment may contain Measurements, e.g. a substation may have temperature measurements and door open indications, a transformer may have oil temperature and tank pressure measurements, a bay may contain a number of power flow measurements and a Breaker may contain a switch status measurement. The PSR - Measurement association is intended to capture this use of Measurement and is included in the naming hierarchy based on EquipmentContainer. The naming hierarchy typically has Measurements as leaves, e.g. Substation-VoltageLevel-Bay-Switch-Measurement. Some Measurements represent quantities related to a particular sensor location in the network, e.g. a voltage transformer (VT) or potential transformer (PT) at a busbar or a current transformer (CT) at the bar between a breaker and an isolator. The sensing position is not captured in the PSR - Measurement association. Instead it is captured by the Measurement - Terminal association that is used to define the sensing location in the network topology. The location is defined by the connection of the Terminal to ConductingEquipment. If both a Terminal and PSR are associated, and the PSR is of type ConductingEquipment, the associated Terminal should belong to that ConductingEquipment instance. When the sensor location is needed both Measurement-PSR and Measurement-Terminal are used. The Measurement-Terminal association is never used alone. More...

#include <Measurement.hpp>

Inheritance diagram for CIMPP::Measurement:

[legend]

Collaboration diagram for CIMPP::Measurement:

[legend]

Public Member Functions
const char *	debugString () const override
const std::list< std::string > &	getAttributeNames () const override
const std::string &	getClassNamespaceUrl () const override
const std::string &	getAttributeNamespaceUrl (const std::string &attrName) const override
const std::list< CGMESProfile > &	getPossibleProfiles () const override
const CGMESProfile &	getRecommendedProfile () const override
const std::list< CGMESProfile > &	getPossibleAttributeProfiles (const std::string &attrName) const override
const std::list< CGMESProfile > &	getPossibleProfilesIncludingAttributes () const override
void	addPrimitiveGetFnsToMap (std::map< std::string, get_function > &get_map) const override
void	addClassGetFnsToMap (std::map< std::string, class_get_function > &get_map) const override
void	addEnumGetFnsToMap (std::map< std::string, get_function > &get_map) const override
bool	isAssignableFrom (BaseClass *otherObject) const override
Public Member Functions inherited from BaseClass
void	setRdfid (const std::string &id)
std::string	getRdfid () const

Static Public Member Functions
static void	addConstructToMap (std::unordered_map< std::string, BaseClass ()()> &factory_map)
static void	addPrimitiveAssignFnsToMap (std::unordered_map< std::string, assign_function > &assign_map)
static void	addClassAssignFnsToMap (std::unordered_map< std::string, class_assign_function > &assign_map)
static const BaseClassDefiner	declare ()
Static Public Member Functions inherited from CIMPP::IdentifiedObject
static void	addConstructToMap (std::unordered_map< std::string, BaseClass ()()> &factory_map)
static void	addPrimitiveAssignFnsToMap (std::unordered_map< std::string, assign_function > &assign_map)
static void	addClassAssignFnsToMap (std::unordered_map< std::string, class_assign_function > &assign_map)
static const BaseClassDefiner	declare ()
Static Public Member Functions inherited from BaseClass
static void	addConstructToMap (std::unordered_map< std::string, BaseClass ()()> &factory_map)
static void	addPrimitiveAssignFnsToMap (std::unordered_map< std::string, assign_function > &assign_map)
static void	addClassAssignFnsToMap (std::unordered_map< std::string, class_assign_function > &assign_map)
static const CIMPP::BaseClassDefiner	declare ()

Public Attributes
CIMPP::PowerSystemResource *	PowerSystemResource
	The power system resource that contains the measurement. Default: nullptr.
CIMPP::ACDCTerminal *	Terminal
	One or more measurements may be associated with a terminal in the network. Default: nullptr.
CIMPP::String	measurementType
	Specifies the type of measurement. For example, this specifies if the measurement represents an indoor temperature, outdoor temperature, bus voltage, line flow, etc. When the measurementType is set to Specialization, the type of Measurement is defined in more detail by the specialized class which inherits from Measurement. Default: "".
CIMPP::PhaseCode	phases
	Indicates to which phases the measurement applies and avoids the need to use measurementType to also encode phase information (which would explode the types). The phase information in Measurement, along with measurementType and phases uniquely defines a Measurement for a device, based on normal network phase. Their meaning will not change when the computed energizing phasing is changed due to jumpers or other reasons. If the attribute is missing three phases (ABC) shall be assumed. Default: 0.
CIMPP::UnitMultiplier	unitMultiplier
	The unit multiplier of the measured quantity. Default: 0.
CIMPP::UnitSymbol	unitSymbol
	The unit of measure of the measured quantity. Default: 0.
Public Attributes inherited from CIMPP::IdentifiedObject
std::list< CIMPP::DiagramObject * >	DiagramObjects
	The diagram objects that are associated with the domain object. Default: {}.
CIMPP::String	description
	The description is a free human readable text describing or naming the object. It may be non unique and may not correlate to a naming hierarchy. Default: "".
CIMPP::String	energyIdentCodeEic
	The attribute is used for an exchange of the EIC code (Energy identification Code). The length of the string is 16 characters as defined by the EIC code. For details on EIC scheme please refer to ENTSO-E web site. Default: "".
CIMPP::String	mRID
	Master resource identifier issued by a model authority. The mRID is unique within an exchange context. Global uniqueness is easily achieved by using a UUID, as specified in RFC 4122, for the mRID. The use of UUID is strongly recommended. For CIMXML data files in RDF syntax conforming to IEC 61970-552, the mRID is mapped to rdf:ID or rdf:about attributes that identify CIM object elements. Default: "".
CIMPP::String	name
	The name is any free human readable and possibly non unique text naming the object. Default: "".
CIMPP::String	shortName
	The attribute is used for an exchange of a human readable short name with length of the string 12 characters maximum. Default: "".

Static Public Attributes
static const char	debugName [] = "Measurement"
Static Public Attributes inherited from CIMPP::IdentifiedObject
static const char	debugName [] = "IdentifiedObject"
Static Public Attributes inherited from BaseClass
static const char	debugName [] = "BaseClass"

Protected Member Functions
std::map< std::string, AttrDetails >	allAttrDetailsMap () const override

Detailed Description

A Measurement represents any measured, calculated or non-measured non-calculated quantity. Any piece of equipment may contain Measurements, e.g. a substation may have temperature measurements and door open indications, a transformer may have oil temperature and tank pressure measurements, a bay may contain a number of power flow measurements and a Breaker may contain a switch status measurement. The PSR - Measurement association is intended to capture this use of Measurement and is included in the naming hierarchy based on EquipmentContainer. The naming hierarchy typically has Measurements as leaves, e.g. Substation-VoltageLevel-Bay-Switch-Measurement. Some Measurements represent quantities related to a particular sensor location in the network, e.g. a voltage transformer (VT) or potential transformer (PT) at a busbar or a current transformer (CT) at the bar between a breaker and an isolator. The sensing position is not captured in the PSR - Measurement association. Instead it is captured by the Measurement - Terminal association that is used to define the sensing location in the network topology. The location is defined by the connection of the Terminal to ConductingEquipment. If both a Terminal and PSR are associated, and the PSR is of type ConductingEquipment, the associated Terminal should belong to that ConductingEquipment instance. When the sensor location is needed both Measurement-PSR and Measurement-Terminal are used. The Measurement-Terminal association is never used alone.