CIMPP::PhaseCode Class Reference

An unordered enumeration of phase identifiers. Allows designation of phases for both transmission and distribution equipment, circuits and loads. The enumeration, by itself, does not describe how the phases are connected together or connected to ground. Ground is not explicitly denoted as a phase. Residential and small commercial loads are often served from single-phase, or split-phase, secondary circuits. For the example of s12N, phases 1 and 2 refer to hot wires that are 180 degrees out of phase, while N refers to the neutral wire. Through single-phase transformer connections, these secondary circuits may be served from one or two of the primary phases A, B, and C. For three-phase loads, use the A, B, C phase codes instead of s12N. The integer values are from IEC 61968-9 to support revenue metering applications. More...

#include <PhaseCode.hpp>

Public Types
enum	PhaseCode_ENUM {   ABCN , ABC , ABN , ACN ,   BCN , AB , AC , BC ,   AN , BN , CN , A ,   B , C , N , s1N ,   s2N , s12N , s1 , s2 ,   s12 , none , X , XY ,   XN , XYN }

Public Member Functions
	PhaseCode (PhaseCode_ENUM value)
PhaseCode &	operator= (PhaseCode_ENUM rop)
	operator PhaseCode_ENUM () const
const char *	debugString () const

Public Attributes
PhaseCode_ENUM	value
bool	initialized

Static Public Attributes
static const char	debugName [] = "PhaseCode"

Friends
std::istream &	operator>> (std::istream &lop, PhaseCode &rop)
std::ostream &	operator<< (std::ostream &os, const PhaseCode &obj)

Detailed Description

An unordered enumeration of phase identifiers. Allows designation of phases for both transmission and distribution equipment, circuits and loads. The enumeration, by itself, does not describe how the phases are connected together or connected to ground. Ground is not explicitly denoted as a phase. Residential and small commercial loads are often served from single-phase, or split-phase, secondary circuits. For the example of s12N, phases 1 and 2 refer to hot wires that are 180 degrees out of phase, while N refers to the neutral wire. Through single-phase transformer connections, these secondary circuits may be served from one or two of the primary phases A, B, and C. For three-phase loads, use the A, B, C phase codes instead of s12N. The integer values are from IEC 61968-9 to support revenue metering applications.

Member Enumeration Documentation

PhaseCode_ENUM

enum CIMPP::PhaseCode::PhaseCode_ENUM

Enumerator
ABCN	Phases A, B, C, and N.
ABC	Phases A, B, and C.
ABN	Phases A, B, and neutral.
ACN	Phases A, C and neutral.
BCN	Phases B, C, and neutral.
AB	Phases A and B.
AC	Phases A and C.
BC	Phases B and C.
AN	Phases A and neutral.
BN	Phases B and neutral.
CN	Phases C and neutral.
A	Phase A.
B	Phase B.
C	Phase C.
N	Neutral phase.
s1N	Secondary phase 1 and neutral.
s2N	Secondary phase 2 and neutral.
s12N	Secondary phases 1, 2, and neutral.
s1	Secondary phase 1.
s2	Secondary phase 2.
s12	Secondary phase 1 and 2.
none	No phases specified.
X	Unknown non-neutral phase.
XY	Two unknown non-neutral phases.
XN	Unknown non-neutral phase plus neutral.
XYN	Two unknown non-neutral phases plus neutral.

---

The documentation for this class was generated from the following files:

• CGMES_3.0.0/PhaseCode.hpp
• CGMES_3.0.0/PhaseCode.cpp