A wire or combination of wires, with consistent electrical characteristics, building a single electrical system, used to carry alternating current between points in the power system. For symmetrical, transposed three phase lines, it is sufficient to use attributes of the line segment, which describe impedances and admittances for the entire length of the segment. Additionally impedances can be computed by using length and associated per length impedances. The BaseVoltage at the two ends of ACLineSegments in a Line shall have the same BaseVoltage.nominalVoltage. However, boundary lines may have slightly different BaseVoltage.nominalVoltages and variation is allowed. Larger voltage difference in general requires use of an equivalent branch. More...

#include <ACLineSegment.hpp>

Inheritance diagram for CIMPP::ACLineSegment:

[legend]

Collaboration diagram for CIMPP::ACLineSegment:

[legend]

Public Member Functions
const char *	debugString () const override
const std::list< std::string > &	getAttributeNames () const override
const std::string &	getClassNamespaceUrl () const override
const std::string &	getAttributeNamespaceUrl (const std::string &attrName) const override
const std::list< CGMESProfile > &	getPossibleProfiles () const override
const CGMESProfile &	getRecommendedProfile () const override
const std::list< CGMESProfile > &	getPossibleAttributeProfiles (const std::string &attrName) const override
const std::list< CGMESProfile > &	getPossibleProfilesIncludingAttributes () const override
void	addPrimitiveGetFnsToMap (std::map< std::string, get_function > &get_map) const override
void	addClassGetFnsToMap (std::map< std::string, class_get_function > &get_map) const override
void	addEnumGetFnsToMap (std::map< std::string, get_function > &get_map) const override
bool	isAssignableFrom (BaseClass *otherObject) const override
Public Member Functions inherited from CIMPP::Conductor
const char *	debugString () const override
const std::list< std::string > &	getAttributeNames () const override
const std::string &	getClassNamespaceUrl () const override
const std::string &	getAttributeNamespaceUrl (const std::string &attrName) const override
const std::list< CGMESProfile > &	getPossibleProfiles () const override
const CGMESProfile &	getRecommendedProfile () const override
const std::list< CGMESProfile > &	getPossibleAttributeProfiles (const std::string &attrName) const override
const std::list< CGMESProfile > &	getPossibleProfilesIncludingAttributes () const override
void	addPrimitiveGetFnsToMap (std::map< std::string, get_function > &get_map) const override
void	addClassGetFnsToMap (std::map< std::string, class_get_function > &get_map) const override
void	addEnumGetFnsToMap (std::map< std::string, get_function > &get_map) const override
bool	isAssignableFrom (BaseClass *otherObject) const override
Public Member Functions inherited from CIMPP::Equipment
const char *	debugString () const override
const std::list< std::string > &	getAttributeNames () const override
const std::string &	getClassNamespaceUrl () const override
const std::string &	getAttributeNamespaceUrl (const std::string &attrName) const override
const std::list< CGMESProfile > &	getPossibleProfiles () const override
const CGMESProfile &	getRecommendedProfile () const override
const std::list< CGMESProfile > &	getPossibleAttributeProfiles (const std::string &attrName) const override
const std::list< CGMESProfile > &	getPossibleProfilesIncludingAttributes () const override
void	addPrimitiveGetFnsToMap (std::map< std::string, get_function > &get_map) const override
void	addClassGetFnsToMap (std::map< std::string, class_get_function > &get_map) const override
void	addEnumGetFnsToMap (std::map< std::string, get_function > &get_map) const override
bool	isAssignableFrom (BaseClass *otherObject) const override
Public Member Functions inherited from CIMPP::PowerSystemResource
const char *	debugString () const override
const std::list< std::string > &	getAttributeNames () const override
const std::string &	getClassNamespaceUrl () const override
const std::string &	getAttributeNamespaceUrl (const std::string &attrName) const override
const std::list< CGMESProfile > &	getPossibleProfiles () const override
const CGMESProfile &	getRecommendedProfile () const override
const std::list< CGMESProfile > &	getPossibleAttributeProfiles (const std::string &attrName) const override
const std::list< CGMESProfile > &	getPossibleProfilesIncludingAttributes () const override
void	addPrimitiveGetFnsToMap (std::map< std::string, get_function > &get_map) const override
void	addClassGetFnsToMap (std::map< std::string, class_get_function > &get_map) const override
void	addEnumGetFnsToMap (std::map< std::string, get_function > &get_map) const override
bool	isAssignableFrom (BaseClass *otherObject) const override
Public Member Functions inherited from BaseClass
void	setRdfid (const std::string &id)
std::string	getRdfid () const

Static Public Member Functions
static void	addConstructToMap (std::unordered_map< std::string, BaseClass ()()> &factory_map)
static void	addPrimitiveAssignFnsToMap (std::unordered_map< std::string, assign_function > &assign_map)
static void	addClassAssignFnsToMap (std::unordered_map< std::string, class_assign_function > &assign_map)
static const BaseClassDefiner	declare ()
Static Public Member Functions inherited from CIMPP::Conductor
static void	addConstructToMap (std::unordered_map< std::string, BaseClass ()()> &factory_map)
static void	addPrimitiveAssignFnsToMap (std::unordered_map< std::string, assign_function > &assign_map)
static void	addClassAssignFnsToMap (std::unordered_map< std::string, class_assign_function > &assign_map)
static const BaseClassDefiner	declare ()
Static Public Member Functions inherited from CIMPP::ConductingEquipment
static void	addConstructToMap (std::unordered_map< std::string, BaseClass ()()> &factory_map)
static void	addPrimitiveAssignFnsToMap (std::unordered_map< std::string, assign_function > &assign_map)
static void	addClassAssignFnsToMap (std::unordered_map< std::string, class_assign_function > &assign_map)
static const BaseClassDefiner	declare ()
Static Public Member Functions inherited from CIMPP::Equipment
static void	addConstructToMap (std::unordered_map< std::string, BaseClass ()()> &factory_map)
static void	addPrimitiveAssignFnsToMap (std::unordered_map< std::string, assign_function > &assign_map)
static void	addClassAssignFnsToMap (std::unordered_map< std::string, class_assign_function > &assign_map)
static const BaseClassDefiner	declare ()
Static Public Member Functions inherited from CIMPP::PowerSystemResource
static void	addConstructToMap (std::unordered_map< std::string, BaseClass ()()> &factory_map)
static void	addPrimitiveAssignFnsToMap (std::unordered_map< std::string, assign_function > &assign_map)
static void	addClassAssignFnsToMap (std::unordered_map< std::string, class_assign_function > &assign_map)
static const BaseClassDefiner	declare ()
Static Public Member Functions inherited from CIMPP::IdentifiedObject
static void	addConstructToMap (std::unordered_map< std::string, BaseClass ()()> &factory_map)
static void	addPrimitiveAssignFnsToMap (std::unordered_map< std::string, assign_function > &assign_map)
static void	addClassAssignFnsToMap (std::unordered_map< std::string, class_assign_function > &assign_map)
static const BaseClassDefiner	declare ()
Static Public Member Functions inherited from BaseClass
static void	addConstructToMap (std::unordered_map< std::string, BaseClass ()()> &factory_map)
static void	addPrimitiveAssignFnsToMap (std::unordered_map< std::string, assign_function > &assign_map)
static void	addClassAssignFnsToMap (std::unordered_map< std::string, class_assign_function > &assign_map)
static const CIMPP::BaseClassDefiner	declare ()

Public Attributes
std::list< CIMPP::Clamp * >	Clamp
	The clamps connected to the line segment. Default: {}.
std::list< CIMPP::Cut * >	Cut
	Cuts applied to the line segment. Default: {}.
CIMPP::Susceptance	b0ch
	Zero sequence shunt (charging) susceptance, uniformly distributed, of the entire line section. Default: 0.0.
CIMPP::Susceptance	bch
	Positive sequence shunt (charging) susceptance, uniformly distributed, of the entire line section. This value represents the full charging over the full length of the line. Default: 0.0.
CIMPP::Conductance	g0ch
	Zero sequence shunt (charging) conductance, uniformly distributed, of the entire line section. Default: 0.0.
CIMPP::Conductance	gch
	Positive sequence shunt (charging) conductance, uniformly distributed, of the entire line section. Default: 0.0.
CIMPP::Resistance	r
	Positive sequence series resistance of the entire line section. Default: 0.0.
CIMPP::Resistance	r0
	Zero sequence series resistance of the entire line section. Default: 0.0.
CIMPP::Temperature	shortCircuitEndTemperature
	Maximum permitted temperature at the end of SC for the calculation of minimum short-circuit currents. Used for short circuit data exchange according to IEC 60909. Default: 0.0.
CIMPP::Reactance	x
	Positive sequence series reactance of the entire line section. Default: 0.0.
CIMPP::Reactance	x0
	Zero sequence series reactance of the entire line section. Default: 0.0.
Public Attributes inherited from CIMPP::Conductor
CIMPP::Length	length
	Segment length for calculating line section capabilities. Default: 0.0.
Public Attributes inherited from CIMPP::ConductingEquipment
CIMPP::BaseVoltage *	BaseVoltage
	Base voltage of this conducting equipment. Use only when there is no voltage level container used and only one base voltage applies. For example, not used for transformers. Default: nullptr.
CIMPP::SvStatus *	SvStatus
	The status state variable associated with this conducting equipment. Default: nullptr.
std::list< CIMPP::Terminal * >	Terminals
	Conducting equipment have terminals that may be connected to other conducting equipment terminals via connectivity nodes or topological nodes. Default: {}.
Public Attributes inherited from CIMPP::Equipment
CIMPP::EquipmentContainer *	EquipmentContainer
	Container of this equipment. Default: nullptr.
std::list< CIMPP::OperationalLimitSet * >	OperationalLimitSet
	The operational limit sets associated with this equipment. Default: {}.
CIMPP::Boolean	aggregate
	The aggregate flag provides an alternative way of representing an aggregated (equivalent) element. It is applicable in cases when the dedicated classes for equivalent equipment do not have all of the attributes necessary to represent the required level of detail. In case the flag is set to true the single instance of equipment represents multiple pieces of equipment that have been modelled together as an aggregate equivalent obtained by a network reduction procedure. Examples would be power transformers or synchronous machines operating in parallel modelled as a single aggregate power transformer or aggregate synchronous machine. The attribute is not used for EquivalentBranch, EquivalentShunt and EquivalentInjection. Default: false.
CIMPP::Boolean	inService
	Specifies the availability of the equipment. True means the equipment is available for topology processing, which determines if the equipment is energized or not. False means that the equipment is treated by network applications as if it is not in the model. Default: false.
CIMPP::Boolean	normallyInService
	Specifies the availability of the equipment under normal operating conditions. True means the equipment is available for topology processing, which determines if the equipment is energized or not. False means that the equipment is treated by network applications as if it is not in the model. Default: false.
Public Attributes inherited from CIMPP::PowerSystemResource
std::list< CIMPP::Control * >	Controls
	The controller outputs used to actually govern a regulating device, e.g. the magnetization of a synchronous machine or capacitor bank breaker actuator. Default: {}.
CIMPP::Location *	Location
	Location of this power system resource. Default: nullptr.
std::list< CIMPP::Measurement * >	Measurements
	The measurements associated with this power system resource. Default: {}.
Public Attributes inherited from CIMPP::IdentifiedObject
std::list< CIMPP::DiagramObject * >	DiagramObjects
	The diagram objects that are associated with the domain object. Default: {}.
CIMPP::String	description
	The description is a free human readable text describing or naming the object. It may be non unique and may not correlate to a naming hierarchy. Default: "".
CIMPP::String	energyIdentCodeEic
	The attribute is used for an exchange of the EIC code (Energy identification Code). The length of the string is 16 characters as defined by the EIC code. For details on EIC scheme please refer to ENTSO-E web site. Default: "".
CIMPP::String	mRID
	Master resource identifier issued by a model authority. The mRID is unique within an exchange context. Global uniqueness is easily achieved by using a UUID, as specified in RFC 4122, for the mRID. The use of UUID is strongly recommended. For CIMXML data files in RDF syntax conforming to IEC 61970-552, the mRID is mapped to rdf:ID or rdf:about attributes that identify CIM object elements. Default: "".
CIMPP::String	name
	The name is any free human readable and possibly non unique text naming the object. Default: "".
CIMPP::String	shortName
	The attribute is used for an exchange of a human readable short name with length of the string 12 characters maximum. Default: "".

Static Public Attributes
static const char	debugName [] = "ACLineSegment"
Static Public Attributes inherited from CIMPP::Conductor
static const char	debugName [] = "Conductor"
Static Public Attributes inherited from CIMPP::ConductingEquipment
static const char	debugName [] = "ConductingEquipment"
Static Public Attributes inherited from CIMPP::Equipment
static const char	debugName [] = "Equipment"
Static Public Attributes inherited from CIMPP::PowerSystemResource
static const char	debugName [] = "PowerSystemResource"
Static Public Attributes inherited from CIMPP::IdentifiedObject
static const char	debugName [] = "IdentifiedObject"
Static Public Attributes inherited from BaseClass
static const char	debugName [] = "BaseClass"

Protected Member Functions
std::map< std::string, AttrDetails >	allAttrDetailsMap () const override
Protected Member Functions inherited from CIMPP::Conductor
std::map< std::string, AttrDetails >	allAttrDetailsMap () const override
Protected Member Functions inherited from CIMPP::Equipment
std::map< std::string, AttrDetails >	allAttrDetailsMap () const override
Protected Member Functions inherited from CIMPP::PowerSystemResource
std::map< std::string, AttrDetails >	allAttrDetailsMap () const override

Detailed Description

A wire or combination of wires, with consistent electrical characteristics, building a single electrical system, used to carry alternating current between points in the power system. For symmetrical, transposed three phase lines, it is sufficient to use attributes of the line segment, which describe impedances and admittances for the entire length of the segment. Additionally impedances can be computed by using length and associated per length impedances. The BaseVoltage at the two ends of ACLineSegments in a Line shall have the same BaseVoltage.nominalVoltage. However, boundary lines may have slightly different BaseVoltage.nominalVoltages and variation is allowed. Larger voltage difference in general requires use of an equivalent branch.

Member Function Documentation

◆ addClassGetFnsToMap()

void ACLineSegment::addClassGetFnsToMap ( std::map< std::string, class_get_function > & get_map ) const

overridevirtual

Reimplemented from BaseClass.

◆ addEnumGetFnsToMap()

void ACLineSegment::addEnumGetFnsToMap ( std::map< std::string, get_function > & get_map ) const

overridevirtual

Reimplemented from BaseClass.

◆ addPrimitiveGetFnsToMap()

void ACLineSegment::addPrimitiveGetFnsToMap ( std::map< std::string, get_function > & get_map ) const

overridevirtual

Reimplemented from BaseClass.

◆ allAttrDetailsMap()

std::map< std::string, AttrDetails > ACLineSegment::allAttrDetailsMap ( ) const

overrideprotectedvirtual

Reimplemented from BaseClass.

◆ debugString()

const char * ACLineSegment::debugString ( ) const

overridevirtual

Reimplemented from BaseClass.

◆ getAttributeNames()

const std::list< std::string > & ACLineSegment::getAttributeNames ( ) const

overridevirtual

Reimplemented from BaseClass.

◆ getAttributeNamespaceUrl()

const std::string & ACLineSegment::getAttributeNamespaceUrl ( const std::string & attrName ) const

overridevirtual

Reimplemented from BaseClass.

◆ getClassNamespaceUrl()

const std::string & ACLineSegment::getClassNamespaceUrl ( ) const

overridevirtual

Reimplemented from BaseClass.

◆ getPossibleAttributeProfiles()

const std::list< CGMESProfile > & ACLineSegment::getPossibleAttributeProfiles ( const std::string & attrName ) const

overridevirtual

Reimplemented from BaseClass.

◆ getPossibleProfiles()

const std::list< CGMESProfile > & ACLineSegment::getPossibleProfiles ( ) const

overridevirtual

Reimplemented from BaseClass.

◆ getPossibleProfilesIncludingAttributes()

const std::list< CGMESProfile > & ACLineSegment::getPossibleProfilesIncludingAttributes ( ) const

overridevirtual

Reimplemented from BaseClass.

◆ getRecommendedProfile()

const CGMESProfile & ACLineSegment::getRecommendedProfile ( ) const

overridevirtual

Reimplemented from BaseClass.

◆ isAssignableFrom()

bool ACLineSegment::isAssignableFrom ( BaseClass * otherObject ) const

overridevirtual

Reimplemented from BaseClass.

The documentation for this class was generated from the following files:

CGMES_3.0.0/ACLineSegment.hpp
CGMES_3.0.0/ACLineSegment.cpp

Public Member Functions

Static Public Member Functions

Public Attributes

Static Public Attributes

Protected Member Functions

Detailed Description

Member Function Documentation

◆ addClassGetFnsToMap()

◆ addEnumGetFnsToMap()

◆ addPrimitiveGetFnsToMap()

◆ allAttrDetailsMap()

◆ debugString()

◆ getAttributeNames()

◆ getAttributeNamespaceUrl()

◆ getClassNamespaceUrl()

◆ getPossibleAttributeProfiles()

◆ getPossibleProfiles()

◆ getPossibleProfilesIncludingAttributes()

◆ getRecommendedProfile()

◆ isAssignableFrom()