P control model type 3. Reference: IEC 61400-27-1:2015, 5.6.5.4. More...

#include <WindContPType3IEC.hpp>

Inheritance diagram for CIMPP::WindContPType3IEC:

[legend]

Collaboration diagram for CIMPP::WindContPType3IEC:

[legend]

Public Member Functions
const char *	debugString () const override
const std::list< std::string > &	getAttributeNames () const override
const std::string &	getClassNamespaceUrl () const override
const std::string &	getAttributeNamespaceUrl (const std::string &attrName) const override
const std::list< CGMESProfile > &	getPossibleProfiles () const override
const CGMESProfile &	getRecommendedProfile () const override
const std::list< CGMESProfile > &	getPossibleAttributeProfiles (const std::string &attrName) const override
const std::list< CGMESProfile > &	getPossibleProfilesIncludingAttributes () const override
void	addPrimitiveGetFnsToMap (std::map< std::string, get_function > &get_map) const override
void	addClassGetFnsToMap (std::map< std::string, class_get_function > &get_map) const override
void	addEnumGetFnsToMap (std::map< std::string, get_function > &get_map) const override
bool	isAssignableFrom (BaseClass *otherObject) const override
Public Member Functions inherited from BaseClass
void	setRdfid (const std::string &id)
std::string	getRdfid () const

Static Public Member Functions
static void	addConstructToMap (std::unordered_map< std::string, BaseClass ()()> &factory_map)
static void	addPrimitiveAssignFnsToMap (std::unordered_map< std::string, assign_function > &assign_map)
static void	addClassAssignFnsToMap (std::unordered_map< std::string, class_assign_function > &assign_map)
static const BaseClassDefiner	declare ()
Static Public Member Functions inherited from CIMPP::IdentifiedObject
static void	addConstructToMap (std::unordered_map< std::string, BaseClass ()()> &factory_map)
static void	addPrimitiveAssignFnsToMap (std::unordered_map< std::string, assign_function > &assign_map)
static void	addClassAssignFnsToMap (std::unordered_map< std::string, class_assign_function > &assign_map)
static const BaseClassDefiner	declare ()
Static Public Member Functions inherited from BaseClass
static void	addConstructToMap (std::unordered_map< std::string, BaseClass ()()> &factory_map)
static void	addPrimitiveAssignFnsToMap (std::unordered_map< std::string, assign_function > &assign_map)
static void	addClassAssignFnsToMap (std::unordered_map< std::string, class_assign_function > &assign_map)
static const CIMPP::BaseClassDefiner	declare ()

Public Attributes
std::list< CIMPP::WindDynamicsLookupTable * >	WindDynamicsLookupTable
	The wind dynamics lookup table associated with this P control type 3 model. Default: {}.
CIMPP::WindTurbineType3IEC *	WindTurbineType3IEC
	Wind turbine type 3 model with which this wind control P type 3 model is associated. Default: nullptr.
CIMPP::PU	dpmax
	Maximum wind turbine power ramp rate (dp_max). It is a type-dependent parameter. Default: 0.0.
CIMPP::PU	dprefmax
	Maximum ramp rate of wind turbine reference power (dp_refmax). It is a project-dependent parameter. Default: 0.0.
CIMPP::PU	dprefmin
	Minimum ramp rate of wind turbine reference power (dp_refmin). It is a project-dependent parameter. Default: 0.0.
CIMPP::PU	dthetamax
	Ramp limitation of torque, required in some grid codes (dt_max). It is a project-dependent parameter. Default: 0.0.
CIMPP::PU	dthetamaxuvrt
	Limitation of torque rise rate during UVRT (dtheta_maxUVRT). It is a project-dependent parameter. Default: 0.0.
CIMPP::PU	kdtd
	Gain for active drive train damping (K_DTD). It is a type-dependent parameter. Default: 0.0.
CIMPP::PU	kip
	PI controller integration parameter (K_Ip). It is a type-dependent parameter. Default: 0.0.
CIMPP::PU	kpp
	PI controller proportional gain (K_Pp). It is a type-dependent parameter. Default: 0.0.
CIMPP::Boolean	mpuvrt
	Enable UVRT power control mode (M_pUVRT₎. It is a project-dependent parameter. true = voltage control (1 in the IEC model) false = reactive power control (0 in the IEC model). Default: false.
CIMPP::PU	omegadtd
	Active drive train damping frequency (omega_DTD). It can be calculated from two mass model parameters. It is a type-dependent parameter. Default: 0.0.
CIMPP::PU	omegaoffset
	Offset to reference value that limits controller action during rotor speed changes (omega_offset). It is a case-dependent parameter. Default: 0.0.
CIMPP::PU	pdtdmax
	Maximum active drive train damping power (p_DTDmax). It is a type-dependent parameter. Default: 0.0.
CIMPP::Seconds	tdvs
	Timedelay after deep voltage sags (T_DVS) (>= 0). It is a project-dependent parameter. Default: 0.0.
CIMPP::PU	thetaemin
	Minimum electrical generator torque (t_emin). It is a type-dependent parameter. Default: 0.0.
CIMPP::PU	thetauscale
	Voltage scaling factor of reset-torque (t_uscale). It is a project-dependent parameter. Default: 0.0.
CIMPP::Seconds	tomegafiltp3
	Filter time constant for generator speed measurement (T_omegafiltp3) (>= 0). It is a type-dependent parameter. Default: 0.0.
CIMPP::Seconds	tomegaref
	Time constant in speed reference filter (T_omega,ref) (>= 0). It is a type-dependent parameter. Default: 0.0.
CIMPP::Seconds	tpfiltp3
	Filter time constant for power measurement (T_pfiltp3) (>= 0). It is a type-dependent parameter. Default: 0.0.
CIMPP::PU	tpord
	Time constant in power order lag (T_pord). It is a type-dependent parameter. Default: 0.0.
CIMPP::Seconds	tufiltp3
	Filter time constant for voltage measurement (T_ufiltp3) (>= 0). It is a type-dependent parameter. Default: 0.0.
CIMPP::PU	udvs
	Voltage limit for hold UVRT status after deep voltage sags (u_DVS). It is a project-dependent parameter. Default: 0.0.
CIMPP::PU	updip
	Voltage dip threshold for P-control (u_Pdip). Part of turbine control, often different (e.g 0.8) from converter thresholds. It is a project-dependent parameter. Default: 0.0.
CIMPP::Float	zeta
	Coefficient for active drive train damping (zeta). It is a type-dependent parameter. Default: 0.0.
Public Attributes inherited from CIMPP::IdentifiedObject
std::list< CIMPP::DiagramObject * >	DiagramObjects
	The diagram objects that are associated with the domain object. Default: {}.
CIMPP::String	description
	The description is a free human readable text describing or naming the object. It may be non unique and may not correlate to a naming hierarchy. Default: "".
CIMPP::String	energyIdentCodeEic
	The attribute is used for an exchange of the EIC code (Energy identification Code). The length of the string is 16 characters as defined by the EIC code. For details on EIC scheme please refer to ENTSO-E web site. Default: "".
CIMPP::String	mRID
	Master resource identifier issued by a model authority. The mRID is unique within an exchange context. Global uniqueness is easily achieved by using a UUID, as specified in RFC 4122, for the mRID. The use of UUID is strongly recommended. For CIMXML data files in RDF syntax conforming to IEC 61970-552, the mRID is mapped to rdf:ID or rdf:about attributes that identify CIM object elements. Default: "".
CIMPP::String	name
	The name is any free human readable and possibly non unique text naming the object. Default: "".
CIMPP::String	shortName
	The attribute is used for an exchange of a human readable short name with length of the string 12 characters maximum. Default: "".

Static Public Attributes
static const char	debugName [] = "WindContPType3IEC"
Static Public Attributes inherited from CIMPP::IdentifiedObject
static const char	debugName [] = "IdentifiedObject"
Static Public Attributes inherited from BaseClass
static const char	debugName [] = "BaseClass"