IEEE 421.5-2005 type ST6B model. This model consists of a PI voltage regulator with an inner loop field voltage regulator and pre-control. The field voltage regulator implements a proportional control. The pre-control and the delay in the feedback circuit increase the dynamic response. Reference: IEEE 421.5-2005, 7.6.
More...
|
|
static void | addConstructToMap (std::unordered_map< std::string, BaseClass *(*)()> &factory_map) |
|
static void | addPrimitiveAssignFnsToMap (std::unordered_map< std::string, assign_function > &assign_map) |
|
static void | addClassAssignFnsToMap (std::unordered_map< std::string, class_assign_function > &assign_map) |
|
static const BaseClassDefiner | declare () |
|
static void | addConstructToMap (std::unordered_map< std::string, BaseClass *(*)()> &factory_map) |
|
static void | addPrimitiveAssignFnsToMap (std::unordered_map< std::string, assign_function > &assign_map) |
|
static void | addClassAssignFnsToMap (std::unordered_map< std::string, class_assign_function > &assign_map) |
|
static const BaseClassDefiner | declare () |
|
static void | addConstructToMap (std::unordered_map< std::string, BaseClass *(*)()> &factory_map) |
|
static void | addPrimitiveAssignFnsToMap (std::unordered_map< std::string, assign_function > &assign_map) |
|
static void | addClassAssignFnsToMap (std::unordered_map< std::string, class_assign_function > &assign_map) |
|
static const BaseClassDefiner | declare () |
|
static void | addConstructToMap (std::unordered_map< std::string, BaseClass *(*)()> &factory_map) |
|
static void | addPrimitiveAssignFnsToMap (std::unordered_map< std::string, assign_function > &assign_map) |
|
static void | addClassAssignFnsToMap (std::unordered_map< std::string, class_assign_function > &assign_map) |
|
static const BaseClassDefiner | declare () |
|
static void | addConstructToMap (std::unordered_map< std::string, BaseClass *(*)()> &factory_map) |
|
static void | addPrimitiveAssignFnsToMap (std::unordered_map< std::string, assign_function > &assign_map) |
|
static void | addClassAssignFnsToMap (std::unordered_map< std::string, class_assign_function > &assign_map) |
|
static const CIMPP::BaseClassDefiner | declare () |
|
|
CIMPP::PU | ilr |
| | Exciter output current limit reference (ILR) (> 0). Typical value = 4,164. Default: 0.0.
|
|
CIMPP::PU | kci |
| | Exciter output current limit adjustment (KCI) (> 0). Typical value = 1,0577. Default: 0.0.
|
|
CIMPP::PU | kff |
| | Pre-control gain constant of the inner loop field regulator (KFF). Typical value = 1. Default: 0.0.
|
|
CIMPP::PU | kg |
| | Feedback gain constant of the inner loop field regulator (KG) (>= 0). Typical value = 1. Default: 0.0.
|
|
CIMPP::PU | kia |
| | Voltage regulator integral gain (KIA) (> 0). Typical value = 45,094. Default: 0.0.
|
|
CIMPP::PU | klr |
| | Exciter output current limiter gain (KLR) (> 0). Typical value = 17,33. Default: 0.0.
|
|
CIMPP::PU | km |
| | Forward gain constant of the inner loop field regulator (KM). Typical value = 1. Default: 0.0.
|
|
CIMPP::PU | kpa |
| | Voltage regulator proportional gain (KPA) (> 0). Typical value = 18,038. Default: 0.0.
|
|
CIMPP::ExcST6BOELselectorKind | oelin |
| | OEL input selector (OELin). Typical value = noOELinput. Default: 0.
|
|
CIMPP::Seconds | tg |
| | Feedback time constant of inner loop field voltage regulator (TG) (>= 0). Typical value = 0,02. Default: 0.0.
|
|
CIMPP::PU | vamax |
| | Maximum voltage regulator output (VAMAX) (> 0). Typical value = 4,81. Default: 0.0.
|
|
CIMPP::PU | vamin |
| | Minimum voltage regulator output (VAMIN) (< 0). Typical value = -3,85. Default: 0.0.
|
|
CIMPP::PU | vrmax |
| | Maximum voltage regulator output (VRMAX) (> 0). Typical value = 4,81. Default: 0.0.
|
|
CIMPP::PU | vrmin |
| | Minimum voltage regulator output (VRMIN) (< 0). Typical value = -3,85. Default: 0.0.
|
|
CIMPP::DiscontinuousExcitationControlDynamics * | DiscontinuousExcitationControlDynamics |
| | Discontinuous excitation control model associated with this excitation system model. Default: nullptr.
|
|
CIMPP::OverexcitationLimiterDynamics * | OverexcitationLimiterDynamics |
| | Overexcitation limiter model associated with this excitation system model. Default: nullptr.
|
|
CIMPP::PFVArControllerType1Dynamics * | PFVArControllerType1Dynamics |
| | Power factor or VAr controller type 1 model associated with this excitation system model. Default: nullptr.
|
|
CIMPP::PFVArControllerType2Dynamics * | PFVArControllerType2Dynamics |
| | Power factor or VAr controller type 2 model associated with this excitation system model. Default: nullptr.
|
|
CIMPP::PowerSystemStabilizerDynamics * | PowerSystemStabilizerDynamics |
| | Power system stabilizer model associated with this excitation system model. Default: nullptr.
|
|
CIMPP::SynchronousMachineDynamics * | SynchronousMachineDynamics |
| | Synchronous machine model with which this excitation system model is associated. Default: nullptr.
|
|
CIMPP::UnderexcitationLimiterDynamics * | UnderexcitationLimiterDynamics |
| | Undrexcitation limiter model associated with this excitation system model. Default: nullptr.
|
|
CIMPP::VoltageCompensatorDynamics * | VoltageCompensatorDynamics |
| | Voltage compensator model associated with this excitation system model. Default: nullptr.
|
|
CIMPP::Boolean | enabled |
| | Function block used indicator. true = use of function block is enabled false = use of function block is disabled. Default: false.
|
|
std::list< CIMPP::DiagramObject * > | DiagramObjects |
| | The diagram objects that are associated with the domain object. Default: {}.
|
|
CIMPP::String | description |
| | The description is a free human readable text describing or naming the object. It may be non unique and may not correlate to a naming hierarchy. Default: "".
|
|
CIMPP::String | energyIdentCodeEic |
| | The attribute is used for an exchange of the EIC code (Energy identification Code). The length of the string is 16 characters as defined by the EIC code. For details on EIC scheme please refer to ENTSO-E web site. Default: "".
|
|
CIMPP::String | mRID |
| | Master resource identifier issued by a model authority. The mRID is unique within an exchange context. Global uniqueness is easily achieved by using a UUID, as specified in RFC 4122, for the mRID. The use of UUID is strongly recommended. For CIMXML data files in RDF syntax conforming to IEC 61970-552, the mRID is mapped to rdf:ID or rdf:about attributes that identify CIM object elements. Default: "".
|
|
CIMPP::String | name |
| | The name is any free human readable and possibly non unique text naming the object. Default: "".
|
|
CIMPP::String | shortName |
| | The attribute is used for an exchange of a human readable short name with length of the string 12 characters maximum. Default: "".
|
IEEE 421.5-2005 type ST6B model. This model consists of a PI voltage regulator with an inner loop field voltage regulator and pre-control. The field voltage regulator implements a proportional control. The pre-control and the delay in the feedback circuit increase the dynamic response. Reference: IEEE 421.5-2005, 7.6.