IEEE 421.5-2005 type ST5B model. The type ST5B excitation system is a variation of the type ST1A model, with alternative overexcitation and underexcitation inputs and additional limits. The block diagram in the IEEE 421.5 standard has input signal Vc and does not indicate the summation point with Vref. The implementation of the ExcIEEEST5B shall consider summation point with Vref. Reference: IEEE 421.5-2005, 7.5.
More...
|
|
static void | addConstructToMap (std::unordered_map< std::string, BaseClass *(*)()> &factory_map) |
|
static void | addPrimitiveAssignFnsToMap (std::unordered_map< std::string, assign_function > &assign_map) |
|
static void | addClassAssignFnsToMap (std::unordered_map< std::string, class_assign_function > &assign_map) |
|
static const BaseClassDefiner | declare () |
|
static void | addConstructToMap (std::unordered_map< std::string, BaseClass *(*)()> &factory_map) |
|
static void | addPrimitiveAssignFnsToMap (std::unordered_map< std::string, assign_function > &assign_map) |
|
static void | addClassAssignFnsToMap (std::unordered_map< std::string, class_assign_function > &assign_map) |
|
static const BaseClassDefiner | declare () |
|
static void | addConstructToMap (std::unordered_map< std::string, BaseClass *(*)()> &factory_map) |
|
static void | addPrimitiveAssignFnsToMap (std::unordered_map< std::string, assign_function > &assign_map) |
|
static void | addClassAssignFnsToMap (std::unordered_map< std::string, class_assign_function > &assign_map) |
|
static const BaseClassDefiner | declare () |
|
static void | addConstructToMap (std::unordered_map< std::string, BaseClass *(*)()> &factory_map) |
|
static void | addPrimitiveAssignFnsToMap (std::unordered_map< std::string, assign_function > &assign_map) |
|
static void | addClassAssignFnsToMap (std::unordered_map< std::string, class_assign_function > &assign_map) |
|
static const BaseClassDefiner | declare () |
|
static void | addConstructToMap (std::unordered_map< std::string, BaseClass *(*)()> &factory_map) |
|
static void | addPrimitiveAssignFnsToMap (std::unordered_map< std::string, assign_function > &assign_map) |
|
static void | addClassAssignFnsToMap (std::unordered_map< std::string, class_assign_function > &assign_map) |
|
static const CIMPP::BaseClassDefiner | declare () |
|
|
CIMPP::PU | kc |
| | Rectifier regulation factor (KC) (>= 0). Typical value = 0,004. Default: 0.0.
|
|
CIMPP::PU | kr |
| | Regulator gain (KR) (> 0). Typical value = 200. Default: 0.0.
|
|
CIMPP::Seconds | t1 |
| | Firing circuit time constant (T1) (>= 0). Typical value = 0,004. Default: 0.0.
|
|
CIMPP::Seconds | tb1 |
| | Regulator lag time constant (TB1) (>= 0). Typical value = 6. Default: 0.0.
|
|
CIMPP::Seconds | tb2 |
| | Regulator lag time constant (TB2) (>= 0). Typical value = 0,01. Default: 0.0.
|
|
CIMPP::Seconds | tc1 |
| | Regulator lead time constant (TC1) (>= 0). Typical value = 0,8. Default: 0.0.
|
|
CIMPP::Seconds | tc2 |
| | Regulator lead time constant (TC2) (>= 0). Typical value = 0,08. Default: 0.0.
|
|
CIMPP::Seconds | tob1 |
| | OEL lag time constant (TOB1) (>= 0). Typical value = 2. Default: 0.0.
|
|
CIMPP::Seconds | tob2 |
| | OEL lag time constant (TOB2) (>= 0). Typical value = 0,08. Default: 0.0.
|
|
CIMPP::Seconds | toc1 |
| | OEL lead time constant (TOC1) (>= 0). Typical value = 0,1. Default: 0.0.
|
|
CIMPP::Seconds | toc2 |
| | OEL lead time constant (TOC2) (>= 0). Typical value = 0,08. Default: 0.0.
|
|
CIMPP::Seconds | tub1 |
| | UEL lag time constant (TUB1) (>= 0). Typical value = 10. Default: 0.0.
|
|
CIMPP::Seconds | tub2 |
| | UEL lag time constant (TUB2) (>= 0). Typical value = 0,05. Default: 0.0.
|
|
CIMPP::Seconds | tuc1 |
| | UEL lead time constant (TUC1) (>= 0). Typical value = 2. Default: 0.0.
|
|
CIMPP::Seconds | tuc2 |
| | UEL lead time constant (TUC2) (>= 0). Typical value = 0,1. Default: 0.0.
|
|
CIMPP::PU | vrmax |
| | Maximum voltage regulator output (VRMAX) (> 0). Typical value = 5. Default: 0.0.
|
|
CIMPP::PU | vrmin |
| | Minimum voltage regulator output (VRMIN) (< 0). Typical value = -4. Default: 0.0.
|
|
CIMPP::DiscontinuousExcitationControlDynamics * | DiscontinuousExcitationControlDynamics |
| | Discontinuous excitation control model associated with this excitation system model. Default: nullptr.
|
|
CIMPP::OverexcitationLimiterDynamics * | OverexcitationLimiterDynamics |
| | Overexcitation limiter model associated with this excitation system model. Default: nullptr.
|
|
CIMPP::PFVArControllerType1Dynamics * | PFVArControllerType1Dynamics |
| | Power factor or VAr controller type 1 model associated with this excitation system model. Default: nullptr.
|
|
CIMPP::PFVArControllerType2Dynamics * | PFVArControllerType2Dynamics |
| | Power factor or VAr controller type 2 model associated with this excitation system model. Default: nullptr.
|
|
CIMPP::PowerSystemStabilizerDynamics * | PowerSystemStabilizerDynamics |
| | Power system stabilizer model associated with this excitation system model. Default: nullptr.
|
|
CIMPP::SynchronousMachineDynamics * | SynchronousMachineDynamics |
| | Synchronous machine model with which this excitation system model is associated. Default: nullptr.
|
|
CIMPP::UnderexcitationLimiterDynamics * | UnderexcitationLimiterDynamics |
| | Undrexcitation limiter model associated with this excitation system model. Default: nullptr.
|
|
CIMPP::VoltageCompensatorDynamics * | VoltageCompensatorDynamics |
| | Voltage compensator model associated with this excitation system model. Default: nullptr.
|
|
CIMPP::Boolean | enabled |
| | Function block used indicator. true = use of function block is enabled false = use of function block is disabled. Default: false.
|
|
std::list< CIMPP::DiagramObject * > | DiagramObjects |
| | The diagram objects that are associated with the domain object. Default: {}.
|
|
CIMPP::String | description |
| | The description is a free human readable text describing or naming the object. It may be non unique and may not correlate to a naming hierarchy. Default: "".
|
|
CIMPP::String | energyIdentCodeEic |
| | The attribute is used for an exchange of the EIC code (Energy identification Code). The length of the string is 16 characters as defined by the EIC code. For details on EIC scheme please refer to ENTSO-E web site. Default: "".
|
|
CIMPP::String | mRID |
| | Master resource identifier issued by a model authority. The mRID is unique within an exchange context. Global uniqueness is easily achieved by using a UUID, as specified in RFC 4122, for the mRID. The use of UUID is strongly recommended. For CIMXML data files in RDF syntax conforming to IEC 61970-552, the mRID is mapped to rdf:ID or rdf:about attributes that identify CIM object elements. Default: "".
|
|
CIMPP::String | name |
| | The name is any free human readable and possibly non unique text naming the object. Default: "".
|
|
CIMPP::String | shortName |
| | The attribute is used for an exchange of a human readable short name with length of the string 12 characters maximum. Default: "".
|
IEEE 421.5-2005 type ST5B model. The type ST5B excitation system is a variation of the type ST1A model, with alternative overexcitation and underexcitation inputs and additional limits. The block diagram in the IEEE 421.5 standard has input signal Vc and does not indicate the summation point with Vref. The implementation of the ExcIEEEST5B shall consider summation point with Vref. Reference: IEEE 421.5-2005, 7.5.