IEEE 421.5-2005 type AC3A model. The model represents the field-controlled alternator-rectifier excitation systems designated type AC3A. These excitation systems include an alternator main exciter with non-controlled rectifiers. The exciter employs self-excitation, and the voltage regulator power is derived from the exciter output voltage. Therefore, this system has an additional nonlinearity, simulated by the use of a multiplier whose inputs are the voltage regulator command signal, Va, and the exciter output voltage, Efd, times KR. This model is applicable to excitation systems employing static voltage regulators. Reference: IEEE 421.5-2005, 6.3.
More...
|
|
static void | addConstructToMap (std::unordered_map< std::string, BaseClass *(*)()> &factory_map) |
|
static void | addPrimitiveAssignFnsToMap (std::unordered_map< std::string, assign_function > &assign_map) |
|
static void | addClassAssignFnsToMap (std::unordered_map< std::string, class_assign_function > &assign_map) |
|
static const BaseClassDefiner | declare () |
|
static void | addConstructToMap (std::unordered_map< std::string, BaseClass *(*)()> &factory_map) |
|
static void | addPrimitiveAssignFnsToMap (std::unordered_map< std::string, assign_function > &assign_map) |
|
static void | addClassAssignFnsToMap (std::unordered_map< std::string, class_assign_function > &assign_map) |
|
static const BaseClassDefiner | declare () |
|
static void | addConstructToMap (std::unordered_map< std::string, BaseClass *(*)()> &factory_map) |
|
static void | addPrimitiveAssignFnsToMap (std::unordered_map< std::string, assign_function > &assign_map) |
|
static void | addClassAssignFnsToMap (std::unordered_map< std::string, class_assign_function > &assign_map) |
|
static const BaseClassDefiner | declare () |
|
static void | addConstructToMap (std::unordered_map< std::string, BaseClass *(*)()> &factory_map) |
|
static void | addPrimitiveAssignFnsToMap (std::unordered_map< std::string, assign_function > &assign_map) |
|
static void | addClassAssignFnsToMap (std::unordered_map< std::string, class_assign_function > &assign_map) |
|
static const BaseClassDefiner | declare () |
|
static void | addConstructToMap (std::unordered_map< std::string, BaseClass *(*)()> &factory_map) |
|
static void | addPrimitiveAssignFnsToMap (std::unordered_map< std::string, assign_function > &assign_map) |
|
static void | addClassAssignFnsToMap (std::unordered_map< std::string, class_assign_function > &assign_map) |
|
static const CIMPP::BaseClassDefiner | declare () |
|
|
CIMPP::PU | efdn |
| | Value of Efd at which feedback gain changes (EFDN) (> 0). Typical value = 2,36. Default: 0.0.
|
|
CIMPP::PU | ka |
| | Voltage regulator gain (KA) (> 0). Typical value = 45,62. Default: 0.0.
|
|
CIMPP::PU | kc |
| | Rectifier loading factor proportional to commutating reactance (KC) (>= 0). Typical value = 0,104. Default: 0.0.
|
|
CIMPP::PU | kd |
| | Demagnetizing factor, a function of exciter alternator reactances (KD) (>= 0). Typical value = 0,499. Default: 0.0.
|
|
CIMPP::PU | ke |
| | Exciter constant related to self-excited field (KE). Typical value = 1. Default: 0.0.
|
|
CIMPP::PU | kf |
| | Excitation control system stabilizer gains (KF) (>= 0). Typical value = 0,143. Default: 0.0.
|
|
CIMPP::PU | kn |
| | Excitation control system stabilizer gain (KN) (>= 0). Typical value = 0,05. Default: 0.0.
|
|
CIMPP::PU | kr |
| | Constant associated with regulator and alternator field power supply (KR) (> 0). Typical value = 3,77. Default: 0.0.
|
|
CIMPP::Float | seve1 |
| | Exciter saturation function value at the corresponding exciter voltage, VE1, back of commutating reactance (SE[VE1]) (>= 0). Typical value = 1,143. Default: 0.0.
|
|
CIMPP::Float | seve2 |
| | Exciter saturation function value at the corresponding exciter voltage, VE2, back of commutating reactance (SE[VE2]) (>= 0). Typical value = 0,1. Default: 0.0.
|
|
CIMPP::Seconds | ta |
| | Voltage regulator time constant (TA) (> 0). Typical value = 0,013. Default: 0.0.
|
|
CIMPP::Seconds | tb |
| | Voltage regulator time constant (TB) (>= 0). Typical value = 0. Default: 0.0.
|
|
CIMPP::Seconds | tc |
| | Voltage regulator time constant (TC) (>= 0). Typical value = 0. Default: 0.0.
|
|
CIMPP::Seconds | te |
| | Exciter time constant, integration rate associated with exciter control (TE) (> 0). Typical value = 1,17. Default: 0.0.
|
|
CIMPP::Seconds | tf |
| | Excitation control system stabilizer time constant (TF) (> 0). Typical value = 1. Default: 0.0.
|
|
CIMPP::PU | vamax |
| | Maximum voltage regulator output (VAMAX) (> 0). Typical value = 1. Default: 0.0.
|
|
CIMPP::PU | vamin |
| | Minimum voltage regulator output (VAMIN) (< 0). Typical value = -0,95. Default: 0.0.
|
|
CIMPP::PU | ve1 |
| | Exciter alternator output voltages back of commutating reactance at which saturation is defined (VE1) (> 0). Typical value = 6,24. Default: 0.0.
|
|
CIMPP::PU | ve2 |
| | Exciter alternator output voltages back of commutating reactance at which saturation is defined (VE2) (> 0). Typical value = 4,68. Default: 0.0.
|
|
CIMPP::PU | vemin |
| | Minimum exciter voltage output (VEMIN) (<= 0). Typical value = 0. Default: 0.0.
|
|
CIMPP::PU | vfemax |
| | Exciter field current limit reference (VFEMAX) (>= 0). Typical value = 16. Default: 0.0.
|
|
CIMPP::DiscontinuousExcitationControlDynamics * | DiscontinuousExcitationControlDynamics |
| | Discontinuous excitation control model associated with this excitation system model. Default: nullptr.
|
|
CIMPP::OverexcitationLimiterDynamics * | OverexcitationLimiterDynamics |
| | Overexcitation limiter model associated with this excitation system model. Default: nullptr.
|
|
CIMPP::PFVArControllerType1Dynamics * | PFVArControllerType1Dynamics |
| | Power factor or VAr controller type 1 model associated with this excitation system model. Default: nullptr.
|
|
CIMPP::PFVArControllerType2Dynamics * | PFVArControllerType2Dynamics |
| | Power factor or VAr controller type 2 model associated with this excitation system model. Default: nullptr.
|
|
CIMPP::PowerSystemStabilizerDynamics * | PowerSystemStabilizerDynamics |
| | Power system stabilizer model associated with this excitation system model. Default: nullptr.
|
|
CIMPP::SynchronousMachineDynamics * | SynchronousMachineDynamics |
| | Synchronous machine model with which this excitation system model is associated. Default: nullptr.
|
|
CIMPP::UnderexcitationLimiterDynamics * | UnderexcitationLimiterDynamics |
| | Undrexcitation limiter model associated with this excitation system model. Default: nullptr.
|
|
CIMPP::VoltageCompensatorDynamics * | VoltageCompensatorDynamics |
| | Voltage compensator model associated with this excitation system model. Default: nullptr.
|
|
CIMPP::Boolean | enabled |
| | Function block used indicator. true = use of function block is enabled false = use of function block is disabled. Default: false.
|
|
std::list< CIMPP::DiagramObject * > | DiagramObjects |
| | The diagram objects that are associated with the domain object. Default: {}.
|
|
CIMPP::String | description |
| | The description is a free human readable text describing or naming the object. It may be non unique and may not correlate to a naming hierarchy. Default: "".
|
|
CIMPP::String | energyIdentCodeEic |
| | The attribute is used for an exchange of the EIC code (Energy identification Code). The length of the string is 16 characters as defined by the EIC code. For details on EIC scheme please refer to ENTSO-E web site. Default: "".
|
|
CIMPP::String | mRID |
| | Master resource identifier issued by a model authority. The mRID is unique within an exchange context. Global uniqueness is easily achieved by using a UUID, as specified in RFC 4122, for the mRID. The use of UUID is strongly recommended. For CIMXML data files in RDF syntax conforming to IEC 61970-552, the mRID is mapped to rdf:ID or rdf:about attributes that identify CIM object elements. Default: "".
|
|
CIMPP::String | name |
| | The name is any free human readable and possibly non unique text naming the object. Default: "".
|
|
CIMPP::String | shortName |
| | The attribute is used for an exchange of a human readable short name with length of the string 12 characters maximum. Default: "".
|
IEEE 421.5-2005 type AC3A model. The model represents the field-controlled alternator-rectifier excitation systems designated type AC3A. These excitation systems include an alternator main exciter with non-controlled rectifiers. The exciter employs self-excitation, and the voltage regulator power is derived from the exciter output voltage. Therefore, this system has an additional nonlinearity, simulated by the use of a multiplier whose inputs are the voltage regulator command signal, Va, and the exciter output voltage, Efd, times KR. This model is applicable to excitation systems employing static voltage regulators. Reference: IEEE 421.5-2005, 6.3.