Detailed excitation system ELIN (VATECH). This model represents an all-static excitation system. A PI voltage controller establishes a desired field current set point for a proportional current controller. The integrator of the PI controller has a follow-up input to match its signal to the present field current. Power system stabilizer models used in conjunction with this excitation system model: PssELIN2, PssIEEE2B, Pss2B.
More...
|
|
static void | addConstructToMap (std::unordered_map< std::string, BaseClass *(*)()> &factory_map) |
|
static void | addPrimitiveAssignFnsToMap (std::unordered_map< std::string, assign_function > &assign_map) |
|
static void | addClassAssignFnsToMap (std::unordered_map< std::string, class_assign_function > &assign_map) |
|
static const BaseClassDefiner | declare () |
|
static void | addConstructToMap (std::unordered_map< std::string, BaseClass *(*)()> &factory_map) |
|
static void | addPrimitiveAssignFnsToMap (std::unordered_map< std::string, assign_function > &assign_map) |
|
static void | addClassAssignFnsToMap (std::unordered_map< std::string, class_assign_function > &assign_map) |
|
static const BaseClassDefiner | declare () |
|
static void | addConstructToMap (std::unordered_map< std::string, BaseClass *(*)()> &factory_map) |
|
static void | addPrimitiveAssignFnsToMap (std::unordered_map< std::string, assign_function > &assign_map) |
|
static void | addClassAssignFnsToMap (std::unordered_map< std::string, class_assign_function > &assign_map) |
|
static const BaseClassDefiner | declare () |
|
static void | addConstructToMap (std::unordered_map< std::string, BaseClass *(*)()> &factory_map) |
|
static void | addPrimitiveAssignFnsToMap (std::unordered_map< std::string, assign_function > &assign_map) |
|
static void | addClassAssignFnsToMap (std::unordered_map< std::string, class_assign_function > &assign_map) |
|
static const BaseClassDefiner | declare () |
|
static void | addConstructToMap (std::unordered_map< std::string, BaseClass *(*)()> &factory_map) |
|
static void | addPrimitiveAssignFnsToMap (std::unordered_map< std::string, assign_function > &assign_map) |
|
static void | addClassAssignFnsToMap (std::unordered_map< std::string, class_assign_function > &assign_map) |
|
static const CIMPP::BaseClassDefiner | declare () |
|
|
CIMPP::PU | efdbas |
| | Gain (Efdbas). Typical value = 0,1. Default: 0.0.
|
|
CIMPP::PU | iefmax |
| | Limiter (Iefmax) (> ExcELIN2.iefmin). Typical value = 1. Default: 0.0.
|
|
CIMPP::PU | iefmax2 |
| | Minimum open circuit excitation voltage (Iefmax2). Typical value = -5. Default: 0.0.
|
|
CIMPP::PU | iefmin |
| | Limiter (Iefmin) (< ExcELIN2.iefmax). Typical value = 1. Default: 0.0.
|
|
CIMPP::PU | k1 |
| | Voltage regulator input gain (K1). Typical value = 0. Default: 0.0.
|
|
CIMPP::PU | k1ec |
| | Voltage regulator input limit (K1ec). Typical value = 2. Default: 0.0.
|
|
CIMPP::PU | k2 |
| | Gain (K2). Typical value = 5. Default: 0.0.
|
|
CIMPP::PU | k3 |
| | Gain (K3). Typical value = 0,1. Default: 0.0.
|
|
CIMPP::PU | k4 |
| | Gain (K4). Typical value = 0. Default: 0.0.
|
|
CIMPP::PU | kd1 |
| | Voltage controller derivative gain (Kd1). Typical value = 34,5. Default: 0.0.
|
|
CIMPP::PU | ke2 |
| | Gain (Ke2). Typical value = 0,1. Default: 0.0.
|
|
CIMPP::PU | ketb |
| | Gain (Ketb). Typical value = 0,06. Default: 0.0.
|
|
CIMPP::PU | pid1max |
| | Controller follow up gain (PID1max). Typical value = 2. Default: 0.0.
|
|
CIMPP::PU | seve1 |
| | Exciter saturation function value at the corresponding exciter voltage, Ve1, back of commutating reactance (Se[Ve1]) (>= 0). Typical value = 0. Default: 0.0.
|
|
CIMPP::PU | seve2 |
| | Exciter saturation function value at the corresponding exciter voltage, Ve2, back of commutating reactance (Se[Ve2]) (>= 0). Typical value = 1. Default: 0.0.
|
|
CIMPP::Seconds | tb1 |
| | Voltage controller derivative washout time constant (Tb1) (>= 0). Typical value = 12,45. Default: 0.0.
|
|
CIMPP::Seconds | te |
| | Time constant (Te) (>= 0). Typical value = 0. Default: 0.0.
|
|
CIMPP::Seconds | te2 |
| | Time Constant (Te2) (>= 0). Typical value = 1. Default: 0.0.
|
|
CIMPP::PU | ti1 |
| | Controller follow up deadband (Ti1). Typical value = 0. Default: 0.0.
|
|
CIMPP::Seconds | ti3 |
| | Time constant (Ti3) (>= 0). Typical value = 3. Default: 0.0.
|
|
CIMPP::Seconds | ti4 |
| | Time constant (Ti4) (>= 0). Typical value = 0. Default: 0.0.
|
|
CIMPP::Seconds | tr4 |
| | Time constant (Tr4) (>= 0). Typical value = 1. Default: 0.0.
|
|
CIMPP::PU | upmax |
| | Limiter (Upmax) (> ExcELIN2.upmin). Typical value = 3. Default: 0.0.
|
|
CIMPP::PU | upmin |
| | Limiter (Upmin) (< ExcELIN2.upmax). Typical value = 0. Default: 0.0.
|
|
CIMPP::PU | ve1 |
| | Exciter alternator output voltages back of commutating reactance at which saturation is defined (Ve1) (> 0). Typical value = 3. Default: 0.0.
|
|
CIMPP::PU | ve2 |
| | Exciter alternator output voltages back of commutating reactance at which saturation is defined (Ve2) (> 0). Typical value = 0. Default: 0.0.
|
|
CIMPP::PU | xp |
| | Excitation transformer effective reactance (Xp). Typical value = 1. Default: 0.0.
|
|
CIMPP::DiscontinuousExcitationControlDynamics * | DiscontinuousExcitationControlDynamics |
| | Discontinuous excitation control model associated with this excitation system model. Default: nullptr.
|
|
CIMPP::OverexcitationLimiterDynamics * | OverexcitationLimiterDynamics |
| | Overexcitation limiter model associated with this excitation system model. Default: nullptr.
|
|
CIMPP::PFVArControllerType1Dynamics * | PFVArControllerType1Dynamics |
| | Power factor or VAr controller type 1 model associated with this excitation system model. Default: nullptr.
|
|
CIMPP::PFVArControllerType2Dynamics * | PFVArControllerType2Dynamics |
| | Power factor or VAr controller type 2 model associated with this excitation system model. Default: nullptr.
|
|
CIMPP::PowerSystemStabilizerDynamics * | PowerSystemStabilizerDynamics |
| | Power system stabilizer model associated with this excitation system model. Default: nullptr.
|
|
CIMPP::SynchronousMachineDynamics * | SynchronousMachineDynamics |
| | Synchronous machine model with which this excitation system model is associated. Default: nullptr.
|
|
CIMPP::UnderexcitationLimiterDynamics * | UnderexcitationLimiterDynamics |
| | Undrexcitation limiter model associated with this excitation system model. Default: nullptr.
|
|
CIMPP::VoltageCompensatorDynamics * | VoltageCompensatorDynamics |
| | Voltage compensator model associated with this excitation system model. Default: nullptr.
|
|
CIMPP::Boolean | enabled |
| | Function block used indicator. true = use of function block is enabled false = use of function block is disabled. Default: false.
|
|
std::list< CIMPP::DiagramObject * > | DiagramObjects |
| | The diagram objects that are associated with the domain object. Default: {}.
|
|
CIMPP::String | description |
| | The description is a free human readable text describing or naming the object. It may be non unique and may not correlate to a naming hierarchy. Default: "".
|
|
CIMPP::String | energyIdentCodeEic |
| | The attribute is used for an exchange of the EIC code (Energy identification Code). The length of the string is 16 characters as defined by the EIC code. For details on EIC scheme please refer to ENTSO-E web site. Default: "".
|
|
CIMPP::String | mRID |
| | Master resource identifier issued by a model authority. The mRID is unique within an exchange context. Global uniqueness is easily achieved by using a UUID, as specified in RFC 4122, for the mRID. The use of UUID is strongly recommended. For CIMXML data files in RDF syntax conforming to IEC 61970-552, the mRID is mapped to rdf:ID or rdf:about attributes that identify CIM object elements. Default: "".
|
|
CIMPP::String | name |
| | The name is any free human readable and possibly non unique text naming the object. Default: "".
|
|
CIMPP::String | shortName |
| | The attribute is used for an exchange of a human readable short name with length of the string 12 characters maximum. Default: "".
|
Detailed excitation system ELIN (VATECH). This model represents an all-static excitation system. A PI voltage controller establishes a desired field current set point for a proportional current controller. The integrator of the PI controller has a follow-up input to match its signal to the present field current. Power system stabilizer models used in conjunction with this excitation system model: PssELIN2, PssIEEE2B, Pss2B.