10#include <unordered_map>
12#include "TurbineGovernorDynamics.hpp"
13#include "BaseClassDefiner.hpp"
14#include "CGMESProfile.hpp"
15#include "CimClassDetails.hpp"
17#include "ActivePower.hpp"
19#include "Frequency.hpp"
27 class GovGAST1 :
public TurbineGovernorDynamics
136 static const char debugName[];
137 const char* debugString()
const override;
139 const std::list<std::string>& getAttributeNames()
const override;
141 const std::string& getClassNamespaceUrl()
const override;
142 const std::string& getAttributeNamespaceUrl(
const std::string& attrName)
const override;
144 const std::list<CGMESProfile>& getPossibleProfiles()
const override;
145 const CGMESProfile& getRecommendedProfile()
const override;
146 const std::list<CGMESProfile>& getPossibleAttributeProfiles(
const std::string& attrName)
const override;
147 const std::list<CGMESProfile>& getPossibleProfilesIncludingAttributes()
const override;
149 static void addConstructToMap(std::unordered_map<std::string,
BaseClass* (*)()>& factory_map);
150 static void addPrimitiveAssignFnsToMap(std::unordered_map<std::string, assign_function>& assign_map);
151 static void addClassAssignFnsToMap(std::unordered_map<std::string, class_assign_function>& assign_map);
152 void addPrimitiveGetFnsToMap(std::map<std::string, get_function>& get_map)
const override;
153 void addClassGetFnsToMap(std::map<std::string, class_get_function>& get_map)
const override;
154 void addEnumGetFnsToMap(std::map<std::string, get_function>& get_map)
const override;
156 bool isAssignableFrom(
BaseClass* otherObject)
const override;
160 std::map<std::string, AttrDetails> allAttrDetailsMap()
const override;
Definition BaseClass.hpp:22
Product of RMS value of the voltage and the RMS value of the in-phase component of the current.
Definition ActivePower.hpp:14
Definition BaseClassDefiner.hpp:12
A floating point number. The range is unspecified and not limited.
Definition Float.hpp:14
Cycles per second.
Definition Frequency.hpp:14
CIMPP::Float a
Turbine power time constant numerator scale factor (a). Typical value = 0,8. Default: 0....
Definition GovGAST1.hpp:35
CIMPP::PU pgv4
Nonlinear gain point 4, PU power (Pgv4). Typical value = 0. Default: 0.0.
Definition GovGAST1.hpp:98
CIMPP::Float ltrate
Maximum long term fuel valve opening rate (Ltrate). Typical value = 0,02. Default: 0....
Definition GovGAST1.hpp:83
CIMPP::Seconds t4
Governor lead time constant (T4) (>= 0). Typical value = 0. Default: 0.0.
Definition GovGAST1.hpp:122
CIMPP::PU gv5
Nonlinear gain point 5, PU gv (Gv5). Typical value = 0. Default: 0.0.
Definition GovGAST1.hpp:65
CIMPP::PU r
Permanent droop (R) (>0). Typical value = 0,04. Default: 0.0.
Definition GovGAST1.hpp:107
CIMPP::ActivePower db2
Unintentional dead-band (db2). Unit = MW. Typical value = 0. Default: 0.0.
Definition GovGAST1.hpp:44
CIMPP::PU gv3
Nonlinear gain point 3, PU gv (Gv3). Typical value = 0. Default: 0.0.
Definition GovGAST1.hpp:59
CIMPP::PU gv6
Nonlinear gain point 6, PU gv (Gv6). Typical value = 0. Default: 0.0.
Definition GovGAST1.hpp:68
CIMPP::ActivePower mwbase
Base for power values (MWbase) (> 0). Unit = MW. Default: 0.0.
Definition GovGAST1.hpp:86
CIMPP::PU pgv6
Nonlinear gain point 6, PU power (Pgv6). Typical value = 0. Default: 0.0.
Definition GovGAST1.hpp:104
CIMPP::Float rmax
Maximum fuel valve opening rate (Rmax). Unit = PU / s. Typical value = 1. Default: 0....
Definition GovGAST1.hpp:110
CIMPP::PU gv2
Nonlinear gain point 2,PU gv (Gv2). Typical value = 0. Default: 0.0.
Definition GovGAST1.hpp:56
CIMPP::PU lmax
Ambient temperature load limit (Lmax). Lmax is the turbine power output corresponding to the limiting...
Definition GovGAST1.hpp:77
CIMPP::Seconds t2
Turbine power time constant (T2) (>= 0). T2 represents delay due to internal energy storage of the ga...
Definition GovGAST1.hpp:116
CIMPP::PU pgv3
Nonlinear gain point 3, PU power (Pgv3). Typical value = 0. Default: 0.0.
Definition GovGAST1.hpp:95
CIMPP::PU fidle
Fuel flow at zero power output (Fidle). Typical value = 0,18. Default: 0.0.
Definition GovGAST1.hpp:50
CIMPP::PU gv1
Nonlinear gain point 1, PU gv (Gv1). Typical value = 0. Default: 0.0.
Definition GovGAST1.hpp:53
CIMPP::Seconds tltr
Valve position averaging time constant (Tltr) (>= 0). Typical value = 10. Default: 0....
Definition GovGAST1.hpp:128
CIMPP::Seconds t3
Turbine exhaust temperature time constant (T3) (>= 0). T3 represents delay in the exhaust temperature...
Definition GovGAST1.hpp:119
CIMPP::Frequency db1
Intentional dead-band width (db1). Unit = Hz. Typical value = 0. Default: 0.0.
Definition GovGAST1.hpp:41
CIMPP::PU ka
Governor gain (Ka). Typical value = 0. Default: 0.0.
Definition GovGAST1.hpp:71
CIMPP::PU pgv2
Nonlinear gain point 2, PU power (Pgv2). Typical value = 0. Default: 0.0.
Definition GovGAST1.hpp:92
CIMPP::PU vmax
Maximum turbine power, PU of MWbase (Vmax) (> GovGAST1.vmin). Typical value = 1. Default: 0....
Definition GovGAST1.hpp:131
CIMPP::Float b
Turbine power time constant denominator scale factor (b) (>0). Typical value = 1. Default: 0....
Definition GovGAST1.hpp:38
CIMPP::PU pgv1
Nonlinear gain point 1, PU power (Pgv1). Typical value = 0. Default: 0.0.
Definition GovGAST1.hpp:89
CIMPP::Seconds t1
Governor mechanism time constant (T1) (>= 0). T1 represents the natural valve positioning time consta...
Definition GovGAST1.hpp:113
CIMPP::Frequency eps
Intentional db hysteresis (eps). Unit = Hz. Typical value = 0. Default: 0.0.
Definition GovGAST1.hpp:47
CIMPP::PU gv4
Nonlinear gain point 4, PU gv (Gv4). Typical value = 0. Default: 0.0.
Definition GovGAST1.hpp:62
CIMPP::Seconds t5
Governor lag time constant (T5) (>= 0). If = 0, entire gain and lead-lag block is bypassed....
Definition GovGAST1.hpp:125
CIMPP::PU vmin
Minimum turbine power, PU of MWbase (Vmin) (< GovGAST1.vmax). Typical value = 0. Default: 0....
Definition GovGAST1.hpp:134
CIMPP::PU loadinc
Valve position change allowed at fast rate (Loadinc). Typical value = 0,05. Default: 0....
Definition GovGAST1.hpp:80
CIMPP::PU pgv5
Nonlinear gain point 5, PU power (Pgv5). Typical value = 0. Default: 0.0.
Definition GovGAST1.hpp:101
CIMPP::PU kt
Temperature limiter gain (Kt). Typical value = 3. Default: 0.0.
Definition GovGAST1.hpp:74
Per Unit - a positive or negative value referred to a defined base. Values typically range from -10 t...
Definition PU.hpp:14
Time, in seconds.
Definition Seconds.hpp:14