10#include <unordered_map>
12#include "TurbineGovernorDynamics.hpp"
13#include "BaseClassDefiner.hpp"
14#include "CGMESProfile.hpp"
15#include "CimClassDetails.hpp"
17#include "ActivePower.hpp"
19#include "DroopSignalFeedbackKind.hpp"
28 class GovCT1 :
public TurbineGovernorDynamics
140 static const char debugName[];
141 const char* debugString()
const override;
143 const std::list<std::string>& getAttributeNames()
const override;
145 const std::string& getClassNamespaceUrl()
const override;
146 const std::string& getAttributeNamespaceUrl(
const std::string& attrName)
const override;
148 const std::list<CGMESProfile>& getPossibleProfiles()
const override;
149 const CGMESProfile& getRecommendedProfile()
const override;
150 const std::list<CGMESProfile>& getPossibleAttributeProfiles(
const std::string& attrName)
const override;
151 const std::list<CGMESProfile>& getPossibleProfilesIncludingAttributes()
const override;
153 static void addConstructToMap(std::unordered_map<std::string,
BaseClass* (*)()>& factory_map);
154 static void addPrimitiveAssignFnsToMap(std::unordered_map<std::string, assign_function>& assign_map);
155 static void addClassAssignFnsToMap(std::unordered_map<std::string, class_assign_function>& assign_map);
156 void addPrimitiveGetFnsToMap(std::map<std::string, get_function>& get_map)
const override;
157 void addClassGetFnsToMap(std::map<std::string, class_get_function>& get_map)
const override;
158 void addEnumGetFnsToMap(std::map<std::string, get_function>& get_map)
const override;
160 bool isAssignableFrom(
BaseClass* otherObject)
const override;
164 std::map<std::string, AttrDetails> allAttrDetailsMap()
const override;
Definition BaseClass.hpp:22
Product of RMS value of the voltage and the RMS value of the in-phase component of the current.
Definition ActivePower.hpp:14
Definition BaseClassDefiner.hpp:12
Definition Boolean.hpp:13
Governor droop signal feedback source.
Definition DroopSignalFeedbackKind.hpp:14
A floating point number. The range is unspecified and not limited.
Definition Float.hpp:14
CIMPP::PU kpgov
Governor proportional gain (Kpgov). Typical value = 10. Default: 0.0.
Definition GovCT1.hpp:60
CIMPP::Boolean wfspd
Switch for fuel source characteristic to recognize that fuel flow, for a given fuel valve stroke,...
Definition GovCT1.hpp:138
CIMPP::Float ropen
Maximum valve opening rate (Ropen). Unit = PU / s. Typical value = 0.10. Default: 0....
Definition GovCT1.hpp:90
CIMPP::PU ka
Acceleration limiter gain (Ka). Typical value = 10. Default: 0.0.
Definition GovCT1.hpp:45
CIMPP::Seconds tact
Actuator time constant (Tact) (>= 0). Typical value = 0,5. Default: 0.0.
Definition GovCT1.hpp:102
CIMPP::PU rup
Maximum rate of load limit increase (Rup). Typical value = 99. Default: 0.0.
Definition GovCT1.hpp:96
CIMPP::PU kimw
Power controller (reset) gain (Kimw). The default value of 0,01 corresponds to a reset time of 100 s....
Definition GovCT1.hpp:57
CIMPP::Seconds tsb
Temperature detection lag time constant (Tsb) (>= 0). Typical value = 5. Default: 0....
Definition GovCT1.hpp:126
CIMPP::PU wfnl
No load fuel flow (Wfnl). Typical value = 0,2. Default: 0.0.
Definition GovCT1.hpp:135
CIMPP::ActivePower mwbase
Base for power values (MWbase) (> 0). Unit = MW. Default: 0.0.
Definition GovCT1.hpp:78
CIMPP::Seconds ta
Acceleration limiter time constant (Ta) (> 0). Typical value = 0,1. Default: 0.0.
Definition GovCT1.hpp:99
CIMPP::Seconds tc
Turbine lead time constant (Tc) (>= 0). Typical value = 0. Default: 0.0.
Definition GovCT1.hpp:108
CIMPP::Float rclose
Minimum valve closing rate (Rclose). Unit = PU / s. Typical value = -0,1. Default: 0....
Definition GovCT1.hpp:84
CIMPP::PU maxerr
Maximum value for speed error signal (maxerr) (> GovCT1.minerr). Typical value = 0,...
Definition GovCT1.hpp:72
CIMPP::DroopSignalFeedbackKind rselect
Feedback signal for droop (Rselect). Typical value = electricalPower. Default: 0.
Definition GovCT1.hpp:93
CIMPP::PU db
Speed governor deadband in PU speed (db). In the majority of applications, it is recommended that thi...
Definition GovCT1.hpp:39
CIMPP::PU r
Permanent droop (R). Typical value = 0,04. Default: 0.0.
Definition GovCT1.hpp:81
CIMPP::Seconds tfload
Load-limiter time constant (Tfload) (> 0). Typical value = 3. Default: 0.0.
Definition GovCT1.hpp:117
CIMPP::PU rdown
Maximum rate of load limit decrease (Rdown). Typical value = -99. Default: 0.0.
Definition GovCT1.hpp:87
CIMPP::PU kiload
Load limiter integral gain for PI controller (Kiload). Typical value = 0,67. Default: 0....
Definition GovCT1.hpp:54
CIMPP::PU vmax
Maximum valve position limit (Vmax) (> GovCT1.vmin). Typical value = 1. Default: 0....
Definition GovCT1.hpp:129
CIMPP::Float aset
Acceleration limiter setpoint (Aset). Unit = PU / s. Typical value = 0,01. Default: 0....
Definition GovCT1.hpp:36
CIMPP::Seconds tpelec
Electrical power transducer time constant (Tpelec) (> 0). Typical value = 1. Default: 0....
Definition GovCT1.hpp:120
CIMPP::PU kturb
Turbine gain (Kturb) (> 0). Typical value = 1,5. Default: 0.0.
Definition GovCT1.hpp:66
CIMPP::PU kigov
Governor integral gain (Kigov). Typical value = 2. Default: 0.0.
Definition GovCT1.hpp:51
CIMPP::PU vmin
Minimum valve position limit (Vmin) (< GovCT1.vmax). Typical value = 0,15. Default: 0....
Definition GovCT1.hpp:132
CIMPP::Seconds tdgov
Governor derivative controller time constant (Tdgov) (>= 0). Typical value = 1. Default: 0....
Definition GovCT1.hpp:111
CIMPP::PU minerr
Minimum value for speed error signal (minerr) (< GovCT1.maxerr). Typical value = -0,...
Definition GovCT1.hpp:75
CIMPP::Seconds tb
Turbine lag time constant (Tb) (> 0). Typical value = 0,5. Default: 0.0.
Definition GovCT1.hpp:105
CIMPP::PU kpload
Load limiter proportional gain for PI controller (Kpload). Typical value = 2. Default: 0....
Definition GovCT1.hpp:63
CIMPP::Seconds teng
Transport time delay for diesel engine used in representing diesel engines where there is a small but...
Definition GovCT1.hpp:114
CIMPP::PU ldref
Load limiter reference value (Ldref). Typical value = 1. Default: 0.0.
Definition GovCT1.hpp:69
CIMPP::Seconds tsa
Temperature detection lead time constant (Tsa) (>= 0). Typical value = 4. Default: 0....
Definition GovCT1.hpp:123
CIMPP::PU kdgov
Governor derivative gain (Kdgov). Typical value = 0. Default: 0.0.
Definition GovCT1.hpp:48
CIMPP::PU dm
Speed sensitivity coefficient (Dm). Dm can represent either the variation of the engine power with th...
Definition GovCT1.hpp:42
Per Unit - a positive or negative value referred to a defined base. Values typically range from -10 t...
Definition PU.hpp:14
Time, in seconds.
Definition Seconds.hpp:14